diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Vendor's Bazaar (http://www.diyaudio.com/forums/vendors-bazaar/)
-   -   FR88EX (http://www.diyaudio.com/forums/vendors-bazaar/179848-fr88ex.html)

Fountek 27th December 2010 02:00 AM

FR88EX
 
I want to recommend one full range driver named FR88EX here.:)

The motor is an underhung neodymium design and the cone is thin (and fragile) formed aluminum. The only negative is a slightly ragged top end that may take some filter work if used full range, but I'd generally recommend a cheap and small neo tweeter placed close and crossed over high. There's a lot on the positive side, like high sensitivity, a clean low end and smooth midrange response. The frame is cast with ventilation under the spider, but users will have to pay close attention to airflow behind the cone - It's even more important to chamfer the inside baffle opening and in this case likely use a thinner baffle material as well.

More details pls see Products_Fountek Electronics Co.,Ltd

Any further help pls contact:

Evan
E-mail:evan.zhu@fountek.net
MSN:Fountek_Evan@hotmail.com

Pano 27th December 2010 02:31 AM

Thanks Evan - looks like an interesting driver.

I have a friend who will be using this in an open baffle design with an 18" woofer under it.
The design may be posted on diyAudio if it works out.

planet10 27th December 2010 02:50 AM

I'm currently breaking in Twins in repurposed uFonken^2 boxes.

dave

Fountek 27th December 2010 07:18 AM

Thanks for your info.
Any need mass batch,pls contact me:
E-mail:evan.zhu@fountek.net
MSN:Fountek_Evan@hotmail.com

Fountek 27th December 2010 07:20 AM

Quote:

Originally Posted by panomaniac (Post 2411446)
Thanks Evan - looks like an interesting driver.

I have a friend who will be using this in an open baffle design with an 18" woofer under it.
The design may be posted on diyAudio if it works out.

what's quantity will you need?
Do you have contact info?:)

Evan
E-mail:evan.zhu@fountek.net
MSN:Fountek_Evan@hotmail.com

Fountek 27th December 2010 07:23 AM

Quote:

Originally Posted by planet10 (Post 2411468)
I'm currently breaking in Twins in repurposed uFonken^2 boxes.

dave

Thank you Dave
what's your contact info?we can contact by E-mail,MSN orthers if possible.

Evan
E-mail:evan.zhu@fountek.net
MSN:Fountek_Evan@hotmail.com

Fountek 30th December 2010 11:28 PM

aaa

malibujeff 7th May 2011 04:12 PM

3 Attachment(s)
Great speaker. Here is what I built.

fakeout 26th March 2012 01:02 AM

Quote:

Originally Posted by malibujeff (Post 2564581)
Great speaker. Here is what I built.

Cool, is that the Martello plan? If not, can you post the dimensions?

malibujeff 26th March 2012 02:18 AM

Yes, Martello.


All times are GMT. The time now is 08:36 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2