• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Loudspeaker Protection Unit

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
The Saint

The Saint

Member
Joined 2002
holtonprecisionaudio.com
Hi Everyone

Here is my new Loudspeaker Protection Unit. The LSP-1

An externally hosted image should be here but it was not working when we last tested it.


It has the following features...

The features of the LSP-1 board are listed below.

Controls one channel only for ease of wiring and placement
Onboard regulated power supply, 60vac max input supply.
Onboard PSU is current foldback limited protected
2 sec output turn on delay.
Immediate output turn off when powered down.
High current 30 Amp control relay.
High quality FR4 3 ounce copper PCB.
Status LED indicator.
Heat sink over temperature,loudspeaker shut off option
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom