diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Vendor's Bazaar (http://www.diyaudio.com/forums/vendors-bazaar/)
-   -   The Pumpkin preamp package(s) for sale (http://www.diyaudio.com/forums/vendors-bazaar/110443-pumpkin-preamp-package-s-sale.html)

Zen Mod 21st October 2007 12:12 AM

The Pumpkin preamp package(s) for sale
 
well , as in subject ;

never-ending developing thread (mostly off topic) HERE

freshly started building thread with definitive schematics and other related info HERE


full Pumpkin package is consisted in variant marked as "A" ;

so:

"A" package - two main boards with two reg boards

main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs

reg pcbs - 2 pcs
BC546B - 4 matched pairs
BC546B - 6 pcs
BC556B - 4 matched pairs
BC556B - 6 pcs
LM336-5Z - 4 pcs
BF245C - 4 pcs

price 95 Euro


"B" package - two main boards with just one reg board; this variant possible with few changes in resistors on reg board and somewhat bigger heatsinks than you can see in mentioned threads

main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs

reg pcbs - 1 pcs
BC546B - 2 matched pairs
BC546B - 3 pcs
BC556B - 2 matched pairs
BC556B - 3 pcs
LM336-5Z - 2 pcs
BF245C - 2 pcs


price is 80 Euros



"C" package just two main boards- without regs

main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs

price is 59 Euros

"D" package just two reg boards , if you need them for your own eeny weeny whatever sort of stage ; they're easy scalable for anything between twice 15 to twice 80 - 90 volts at output and - somewhat dependable of output voltage - even to 300 mA of output current

reg pcbs - 2 pcs
BC546B - 4 matched pairs
BC546B - 6 pcs
BC556B - 4 matched pairs
BC556B - 6 pcs
LM336-5Z - 4 pcs
BF245C - 4 pcs

price is 65 Euros

my modest conclusion is that entire package is ,even most expensive, , still best bang for the buck ......


P&P expenses are EXTRA ; count on 6 to 12 Euros ,depending of destination ; Air Mail off course .

Paypal fee is my concern

you can reach me - if you wish , on this e-mail addy :

chokyATneobee.net ; obviously- you need to replace "AT" with "@"

in case that you can make your own pcbs for :Pumpkin: feel free to do this and join us in mentioned building thread ;)

dviswa 22nd October 2007 01:42 PM

Hi ZM,

Can you please provide a BOM?
Also is it possible to add a heat sink to the packages for an extra cost?

Regards,
Dinesh

Zen Mod 22nd October 2007 01:54 PM

Quote:

Originally posted by dviswa
Hi ZM,

Can you please provide a BOM?
Also is it possible to add a heat sink to the packages for an extra cost?

Regards,
Dinesh


you can expect generic list of parts this days in new thread ,also as pdf file fr download .
I can't make proper BOM (with digikey or something purchase numbers etc) for you fellas living in US , just because I don't live there and I can't easily check that some part actually exist in vivo,not just in online catalog .

anyway - I think that generic BOM will be enough ,especially if I include adequate simillar types for some positions .

heatsinks ?
off course I can , but you really don't need to buy them from any greedy Eu based boy ; you can easily cut few sheets of AL ....... dissipation is not so big ; heatsinks on piccies are nice and effective , but not more effective than same length ,twice that high - 3mm Al sheet.

dviswa 24th October 2007 03:21 AM

Hi ZM,

Thanks for the BOM. Please consider adding for extra cost
Q5,Q7 IRF9510 matched pair
Q6,Q8 IRF510 matched pair

This will save the hassle of buying a large number of these devices and matching them, since you are already providing some of the matched devices.

Obviously you know somebody will raise the same question for the shunty once you have published a BOM for it.

Regards,
Dinesh

Zen Mod 24th October 2007 08:30 AM

Quote:

Originally posted by dviswa
Hi ZM,

Thanks for the BOM. Please consider adding for extra cost
Q5,Q7 IRF9510 matched pair
Q6,Q8 IRF510 matched pair

This will save the hassle of buying a large number of these devices and matching them, since you are already providing some of the matched devices.
................



well, I'll do that if someone will be interested ;)

Quote:

Obviously you know somebody will raise the same question for the shunty once you have published a BOM for it.
for Shunty - little bjts are just "good to be matched , but not absolutely necessary ; I'm sending them just because they aren't big hassle neither for matching or final cost , and it's really better if they are matched .

regarding IRFs and darlingtons in Shunty , there is absolutely no reason for matching them

Zen Mod 24th October 2007 09:02 AM

Pumpkin BOM
 
too late for editing previous post ;

just in case , first BOM is HERE

mpmarino 24th October 2007 12:26 PM

To save searching through that perfectly organized pumpkin thread -

Regarding the fancy pants shunty, How many volt secondary transformer minimum do we need to get +-36v?

Or should I ask - How many volts does shunty drop before arriving at final regulated voltage?

Will Shunty drive Pumpkin drive F4?

Zen Mod 24th October 2007 12:31 PM

Quote:

Originally posted by mpmarino
To save searching through that perfectly organized pumpkin thread -

Regarding the fancy pants shunty, How many volt secondary transformer minimum do we need to get +-36v?

Or should I ask - How many volts does shunty drop before arriving at final regulated voltage?

Will Shunty drive Pumpkin drive F4?


you'll find that all in dedicated BOM-schmtc-few tips -pdf

ya need dreky 84Vct / 600mA xformer

so - 84/2x1,41~60Vdc ........... so you cheapskate can use even 63V caps on input of Shunty

well - if sissssy series reg almost succeeded at BAF to drive a F4 driving Pumpkin ............ I presume that Shunty will do this :devilr:

dviswa 24th October 2007 10:22 PM

Quote:

Originally posted by Zen Mod



well, I'll do that if someone will be interested ;)



for Shunty - little bjts are just "good to be matched , but not absolutely necessary ; I'm sending them just because they aren't big hassle neither for matching or final cost , and it's really better if they are matched .

regarding IRFs and darlingtons in Shunty , there is absolutely no reason for matching them

Great, please make a Package A+ , which include the additional FETs.

Thanks,
Dinesh

dviswa 24th October 2007 11:42 PM

Oops, I forgot to ask another question. The forum does not let me edit posts beyond 30 minutes.

ZM,

What is the output of this preamp and at what load impedence?

Thanks,
Dinesh


All times are GMT. The time now is 08:45 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2