Still available?
Hello Zen Mod
Are these still still available?
I would be very interested in a package "A+", as DVISWA was able to negotiate...
Thanks in advance
myleftear
Oh, and... the link to the build-thread doesn't seem to be working :-(
Hello Zen Mod
Are these still still available?
I would be very interested in a package "A+", as DVISWA was able to negotiate...
Thanks in advance
myleftear
Oh, and... the link to the build-thread doesn't seem to be working :-(
well , as in subject ;
never-ending developing thread (mostly off topic) HERE
freshly started building thread with definitive schematics and other related info HERE
full Pumpkin package is consisted in variant marked as "A" ;
so:
"A" package - two main boards with two reg boards
main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs
reg pcbs - 2 pcs
BC546B - 4 matched pairs
BC546B - 6 pcs
BC556B - 4 matched pairs
BC556B - 6 pcs
LM336-5Z - 4 pcs
BF245C - 4 pcs
price 95 Euro
"B" package - two main boards with just one reg board; this variant possible with few changes in resistors on reg board and somewhat bigger heatsinks than you can see in mentioned threads
main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs
reg pcbs - 1 pcs
BC546B - 2 matched pairs
BC546B - 3 pcs
BC556B - 2 matched pairs
BC556B - 3 pcs
LM336-5Z - 2 pcs
BF245C - 2 pcs
price is 80 Euros
"C" package just two main boards- without regs
main pcb - 2 pcs
J310 jfets - 2 matched pairs
J310 jfets - 2 pieces
BC546B - 2 matched pairs
BC546B - 2 pcs
price is 59 Euros
"D" package just two reg boards , if you need them for your own eeny weeny whatever sort of stage ; they're easy scalable for anything between twice 15 to twice 80 - 90 volts at output and - somewhat dependable of output voltage - even to 300 mA of output current
reg pcbs - 2 pcs
BC546B - 4 matched pairs
BC546B - 6 pcs
BC556B - 4 matched pairs
BC556B - 6 pcs
LM336-5Z - 4 pcs
BF245C - 4 pcs
price is 65 Euros
my modest conclusion is that entire package is ,even most expensive, , still best bang for the buck ......
P&P expenses are EXTRA ; count on 6 to 12 Euros ,depending of destination ; Air Mail off course .
Paypal fee is my concern
you can reach me - if you wish , on this e-mail addy :
zenmodiyaudioATgmail.com ; obviously- you need to replace "AT" with "@"
in case that you can make your own pcbs for feel free to do this and join us in mentioned building thread
edit: if you want matched IRF outputs , that's 20E more
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Vendor's Bazaar
- The Pumpkin preamp package(s) for sale