• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

First One - mosFET amplifier module

Jump to Latest
F

fluid

Member
Joined 2009
ClaudeG said:
If the FO has an input sensitivity of 1,5V (which would be low but well) and your source a 3V output then a pre with no gain will be more than enough to drive the FO to max level.
Click to expand...

FO M voltage gain is 27.5dB = 23.71 times input voltage

1.5 x 23.71 = 35.56

35.56V into 8 Ohm load gives 158 W and the FO M is rated 160 W at 8 ohms.

If you reverse the calculation to get 160 W needs 1.5089V.

Easier to say 1.5V :)
 
S

savvas

Member
Joined 2004
maxlorenz said:
What makes you think that?
Click to expand...

Well, it's easy to understand, when you have lack of communication with someone, let alone fixing the problem, you don't want that kind of trouble in the future. And I just want to buy something and asked a question, didn't expect service or something.
Maybe he doesn't check his diyaudio account regularly so at least it should be an email available
 
Bassivus

Bassivus

Member
Joined 2004
savvas said:
Well, it's easy to understand, when you have lack of communication with someone, let alone fixing the problem, you don't want that kind of trouble in the future. And I just want to buy something and asked a question, didn't expect service or something.
Maybe he doesn't check his diyaudio account regularly so at least it should be an email available
Click to expand...

Have you tried on facebook? https://www.facebook.com/first.one.amp/
 
Lazy Cat

Lazy Cat

Member
Joined 2007
Hi guys :wave2:

Lots of work lately, new FO module's front-end in R&D, as you all can see from THD plot in post #3914 this will position FO modules to pole position on the market.

Also new FO components launched to the market, FO music server, preamp DAC and power amp gain worldwide availability in autumn this year, online sales orders only.

Have all nice summer holidays. :)
 

Attachments

  • IMG_9516.JPG
    IMG_9516.JPG
    575.2 KB · Views: 531
  • IMG_9515.JPG
    IMG_9515.JPG
    642.5 KB · Views: 518
  • IMG_9514.JPG
    IMG_9514.JPG
    538.2 KB · Views: 504
Last edited:
C

ClaudeG

Member
Joined 2015
Hi LC,

Nice to read you again :)

Re "Preamp DAC", can you tell us more?

Is this just a DAC or also ADC? Does it have an RIAA or at least analog input?

Will that be available as a kit as the M modules and what price range are you targeting?

Many thanks for all your development work for the community, sounds great already!

Claude
 
A

AndriyOL

Member
Joined 2008
No, before in the past LC was kind and generous enough to share his schematics to our community. The amps was called SSA with many variations. It was a good times, but they are gone now.
If someone would like to copy he (she) could do this even without schematic, with a help of RE.
As for me such nice products unfortunately aren't available for DIYers, only for capable buyers.
 
C

ClaudeG

Member
Joined 2015
You stand correct: I was refering to the FO line, but indeed lot of discussions and sharing back in SSA times.

OK, FO comes as a ready to go module, so DIY is plugging and PS, but that's the way forward for the top range: today a DIYer can't beat modern multi-layer / ultra compact layout / SMD builds...

Still very interested in LC's work and probably one of the best offers around, let's see what comes next :)

Claude
 
You must log in or register to reply here.
Top Bottom