Mono boards.
I guess 6$ per shipment.
Thanx, Do I just tell them I want 2 then Pay-Pal them the $6?
Would like to take 2PCBs Please.
Thanks for joining us. Only two were left, they are yours.
One question..
Are we talking type1 or type2?
Notice that C1 (100u) has become C8 (220u) in type2. According to schematics at http://harrisonaudiolabs.com/Amplifiers/amplifiers.htm
C8 is not in the BOM btw.
Sincerely
Are we talking type1 or type2?
Notice that C1 (100u) has become C8 (220u) in type2. According to schematics at http://harrisonaudiolabs.com/Amplifiers/amplifiers.htm
C8 is not in the BOM btw.
Sincerely
Last edited:
One question..
Are we talking type1 or type2?
Notice that C1 (100u) has become C8 (220u) in type2. According to schematics at HAL: Amplifiers
C8 is not in the BOM btw.
Sincerely
Type 2
I am wondering how the output transistors will be mounted on the heatsink for this PCB.
TYPE 2
1. Place unpopulated PCB on heat-sink.
2. Use ink to mark the lead positions on the heat-sink.
3. Place transistors on heat sink with the pins bent straight up
4. Align the transistors leads with the ink marks
5. Use ink to mark the mounting holes of each transistor
6. Drill mounting holes
7. Mount transistors
8. Populate PCB
9. Place PCB over transistors
10. solder the transistors
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Vendor's Bazaar
- 50 Free SYMEF PCBs