diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Twisted Pear (http://www.diyaudio.com/forums/twisted-pear/)
-   -   Sympatico - input from DC coupled DAC's balanced output (http://www.diyaudio.com/forums/twisted-pear/211910-sympatico-input-dc-coupled-dacs-balanced-output.html)

leehan 1st May 2012 07:43 PM

Sympatico - input from DC coupled DAC's balanced output
 
Would I need any capacitors at inputs of Sympatico if I want to drive it directly with my DC coupled DAC's balanced outputs?

DAC has a volume control and I want to minimize the stages. Its manufacturer states that output DC offset is targeted at 10mV (+- 3mV) at factory.

(Excuse me if this is an obvious question, I am new to the analogue world and hope may be Sympatico's design would help avoiding caps.)

Thanks a lot.

leehan 1st May 2012 10:46 PM

OK, I'll need them: http://www.diyaudio.com/forums/twist...a-no-caps.html

Now back to practicing soldering with Velleman kits...

Russ White 3rd May 2012 12:33 PM

Yes, I would use them with that much offset :)


All times are GMT. The time now is 07:17 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2