• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

ballsie lite I/V

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
Russ White

Russ White

Member
Joined 2005
twistedpearaudio.com
Actually technically it can, but not in stock form. You would need two of them (per channel) each setup as an inverting amplifier with a jumper at the input resistor and something between 187 and 356R or so at the feedback restsor. :) This would get you something close to what the ESS demo board does (as well as lots of other apps).

Ventus and Ventus EZ can also be easily setup this way.

If you want BAL/SE conversion you would need a total of 6 modules.

Cheers!
Russ
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom