legato original comsumption

back · 16th November 2011, 01:23 PM

hi guys,

i am reading at legato 1 manual consumption 360ma.

is it per rail or total?

Russ White · 16th November 2011, 03:39 PM

In this case what is sunk from one rail must be sourced from the other.

So it is technically both.

back · 16th November 2011, 07:15 PM

so one placid at 410ma is ok?

it`s realy hot but i can still touch the heatsinks.

Russ White · 16th November 2011, 09:29 PM

Placid HD-BP?

If so, yes it should be just fine. Just check the shunt current, and aim for about 50ma.

back · 16th November 2011, 11:28 PM

bp the old one not HD.

i think the current is a little less because i have no buffer maybe 300ma.

back · 17th November 2011, 01:02 PM

i lowered current and i think that it is total because i have no voltage drop until 200ma per rail but i have at 180ma.

i left it at 250ma and now i will do some listening to see if i it sounds the same.

16th November 2011, 01:23 PM	#1
back diyAudio Member Join Date: Nov 2005 Location: crete	legato original comsumption hi guys, i am reading at legato 1 manual consumption 360ma. is it per rail or total?

16th November 2011, 03:39 PM	#2
Russ White diyAudio Member Join Date: Jan 2005 Location: Nashville, TN, USA	In this case what is sunk from one rail must be sourced from the other. So it is technically both. __________________ Less pulp more juice Twisted Pear Audio.

16th November 2011, 09:29 PM	#4
Russ White diyAudio Member Join Date: Jan 2005 Location: Nashville, TN, USA	Placid HD-BP? If so, yes it should be just fine. Just check the shunt current, and aim for about 50ma. __________________ Less pulp more juice Twisted Pear Audio.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Legato for PCM1704	merlin el mago	Twisted Pear	14	31st October 2011 06:04 PM
Legato output impedance	ronpod	Twisted Pear	17	15th April 2011 04:43 PM
legato buffer.	back	Twisted Pear	5	14th January 2011 01:38 PM
how to backup original cd as the same sound quality as original cd	ctrn	Music	3	16th May 2006 04:21 PM

16th November 2011, 07:15 PM	#3
back diyAudio Member Join Date: Nov 2005 Location: crete	so one placid at 410ma is ok? it`s realy hot but i can still touch the heatsinks.

16th November 2011, 11:28 PM	#5
back diyAudio Member Join Date: Nov 2005 Location: crete	bp the old one not HD. i think the current is a little less because i have no buffer maybe 300ma.

17th November 2011, 01:02 PM	#6
back diyAudio Member Join Date: Nov 2005 Location: crete	i lowered current and i think that it is total because i have no voltage drop until 200ma per rail but i have at 180ma. i left it at 250ma and now i will do some listening to see if i it sounds the same.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read