I2S-S/PDIF 2:1 Mux Receiver

merlin el mago · 2nd April 2011, 10:25 AM

I'm looking for an input receiver one I2S + one or two S/PDIF output one I2S to BII, I think you don't have this product & it will be interesting to connect the future new module USB high rez input receiver with other transports like Blue-Ray, CD, DVD-A, SACD, I think can be a nice product to offer for Diyers community.

LeonvB · 2nd April 2011, 12:48 PM

Look for the MRB1 in the future, or for an old OTTO.

merlin el mago · 2nd April 2011, 01:24 PM

Otto is for 2 I2S inputs & I need 1 I2S & 1 S/PDIF inputs?

analog_sa · 2nd April 2011, 01:28 PM

As there are many SPDIF receiver boards you just need a MUX. Cannot see combining this with a receiver on the same board being a good idea.

merlin el mago · 2nd April 2011, 01:32 PM

I don't want to convert I2S in S/PDIF & after come back to convert S/PDIF in I2S when I use the HiFace.

LeonvB · 2nd April 2011, 01:50 PM

The MRB1 is a simple relay module. Since the I2S & SPDIF (provided it's TTL) use the same settings on the BII module you could simply select the input you like. And let the BII handle the correct signal conversion.

lesuisse · 2nd April 2011, 02:21 PM

PCM9211 from TI is the IC you are looking for but requires SW. Good luck

merlin el mago · 2nd April 2011, 06:04 PM

@LeonvB
@lesuisse
Thank you for the info.

2nd April 2011, 10:25 AM	#1
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	I2S-S/PDIF 2:1 Mux Receiver I'm looking for an input receiver one I2S + one or two S/PDIF output one I2S to BII, I think you don't have this product & it will be interesting to connect the future new module USB high rez input receiver with other transports like Blue-Ray, CD, DVD-A, SACD, I think can be a nice product to offer for Diyers community.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Capture 3x (6 ch) I2S or S/PDIF	macboy	Digital Line Level	10	28th April 2010 06:34 PM
Twisted Pear - S/PDIF 4:1 MUX/Receiver Module (new, unused)	n_maher	Swap Meet	3	19th February 2009 04:57 PM
S/PDIF receiver recomendation	borges	Digital Line Level	9	14th October 2008 06:54 PM
SPDIF Input Receiver & MUX	JHertz	Digital Source	4	29th May 2003 03:22 PM
distribute S/PDIF or I2S, passive?	tschrama	Digital Source	14	23rd May 2003 12:22 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

2nd April 2011, 12:48 PM	#2
LeonvB diyAudio Member Join Date: May 2010 Location: Netherlands	Look for the MRB1 in the future, or for an old OTTO.

2nd April 2011, 01:24 PM	#3
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	Otto is for 2 I2S inputs & I need 1 I2S & 1 S/PDIF inputs?

2nd April 2011, 01:28 PM	#4
analog_sa diyAudio Member Join Date: Aug 2002 Location: Sofia	As there are many SPDIF receiver boards you just need a MUX. Cannot see combining this with a receiver on the same board being a good idea.

2nd April 2011, 01:32 PM	#5
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	I don't want to convert I2S in S/PDIF & after come back to convert S/PDIF in I2S when I use the HiFace.

2nd April 2011, 01:50 PM	#6
LeonvB diyAudio Member Join Date: May 2010 Location: Netherlands	The MRB1 is a simple relay module. Since the I2S & SPDIF (provided it's TTL) use the same settings on the BII module you could simply select the input you like. And let the BII handle the correct signal conversion.

2nd April 2011, 02:21 PM	#7
lesuisse diyAudio Member Join Date: Oct 2004	PCM9211 from TI is the IC you are looking for but requires SW. Good luck

2nd April 2011, 06:04 PM	#8
merlin el mago diyAudio Member Join Date: Sep 2009 Location: Catalonia new Europe state	@LeonvB @lesuisse Thank you for the info.