diyAudio (
-   Twisted Pear (
-   -   I2S-S/PDIF 2:1 Mux Receiver (

merlin el mago 2nd April 2011 10:25 AM

I2S-S/PDIF 2:1 Mux Receiver
I'm looking for an input receiver one I2S + one or two S/PDIF output one I2S to BII, I think you don't have this product & it will be interesting to connect the future new module USB high rez input receiver with other transports like Blue-Ray, CD, DVD-A, SACD, I think can be a nice product to offer for Diyers community.

LeonvB 2nd April 2011 12:48 PM

Look for the MRB1 in the future, or for an old OTTO.

merlin el mago 2nd April 2011 01:24 PM

Otto is for 2 I2S inputs & I need 1 I2S & 1 S/PDIF inputs?

analog_sa 2nd April 2011 01:28 PM

As there are many SPDIF receiver boards you just need a MUX. Cannot see combining this with a receiver on the same board being a good idea.

merlin el mago 2nd April 2011 01:32 PM

I don't want to convert I2S in S/PDIF & after come back to convert S/PDIF in I2S when I use the HiFace.

LeonvB 2nd April 2011 01:50 PM

The MRB1 is a simple relay module. Since the I2S & SPDIF (provided it's TTL) use the same settings on the BII module you could simply select the input you like. And let the BII handle the correct signal conversion.

lesuisse 2nd April 2011 02:21 PM

PCM9211 from TI is the IC you are looking for but requires SW. Good luck

merlin el mago 2nd April 2011 06:04 PM

Thank you for the info.

All times are GMT. The time now is 02:16 PM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2