Darwin input selector

chatziva · 21st August 2009, 06:11 PM

http://www.twistedpearaudio.com/docs...rol_Wiring.pdf

can someone help me understand the output wiring?

ok i understand that the loop is always on

what is output "1 + 2a" & "output 1 + 2b" ??

and why are they connected to output 1 and 2 respectively?

chatziva · 24th August 2009, 08:26 PM

nobody?

Iain McNeill · 25th August 2009, 06:16 AM

I think it just refers to how the relays are wired. Output 1 & 2 are just switchable outputs from the same selected input.

I'm going to move this to Twisted Pairs forum and maybe Brian or Russ might chip in.

chatziva · 25th August 2009, 04:46 PM

ah good idea thanks!

chatziva · 4th September 2009, 09:03 PM

Russ? Brian?

Russ White · 16th September 2009, 01:54 AM

Sorry I missed this.

Basically it means:

Output 1: only output 1 goes to just one output relay
Output 2: only output 2 goes to just one output relay
Output 1+2: goes to both outputs and enables both output relays at the same time.

I hope that helps.

Cheers!
Russ

chatziva · 16th September 2009, 05:16 PM

Thank you Russ that's useful!

MoodySteve · 2nd November 2009, 04:00 AM

Any word on when Darwins will be back in stock? I've damaged my board by being too rough with the molex connectors. Hard-wiring the bad traces has caused strange problems that I'm getting tired of chasing after.

Stefano · 3rd May 2010, 09:43 AM

Hi Russ! I cannot find a diagram of wiring between Darwin and Joshua Tree, can you help me, please?

chatziva · 08:10 PM

Russ/Brian

Quick question

Can the loop header be used to couple the darwin selector with a pot to control volume on both outputs?

Thanks

21st August 2009, 06:11 PM	#1
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	Darwin input selector http://www.twistedpearaudio.com/docs...rol_Wiring.pdf can someone help me understand the output wiring? ok i understand that the loop is always on what is output "1 + 2a" & "output 1 + 2b" ?? and why are they connected to output 1 and 2 respectively? __________________ "I don't remember fighting Godzilla, but that's probably what I would've done"

16th September 2009, 01:54 AM	#6
Russ White diyAudio Member Join Date: Jan 2005 Location: Nashville, TN, USA	Sorry I missed this. Basically it means: Output 1: only output 1 goes to just one output relay Output 2: only output 2 goes to just one output relay Output 1+2: goes to both outputs and enables both output relays at the same time. I hope that helps. Cheers! Russ __________________ Less pulp more juice Twisted Pear Audio.

3rd May 2010, 09:43 AM	#9
Stefano diyAudio Member Join Date: Jun 2002 Location: Cagliari, Sardinia	Wiring between Darwin and Joshua Hi Russ! I cannot find a diagram of wiring between Darwin and Joshua Tree, can you help me, please? __________________ Let's make something special

13th June 2010, 08:05 PM	#10
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	Russ/Brian Quick question Can the loop header be used to couple the darwin selector with a pot to control volume on both outputs? Thanks Last edited by chatziva; 13th June 2010 at 08:10 PM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

24th August 2009, 08:26 PM	#2
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	nobody?

25th August 2009, 06:16 AM	#3
Iain McNeill diyAudio Moderator Emeritus Join Date: Oct 2007 Location: Santa Cruz, California	I think it just refers to how the relays are wired. Output 1 & 2 are just switchable outputs from the same selected input. I'm going to move this to Twisted Pairs forum and maybe Brian or Russ might chip in.

25th August 2009, 04:46 PM	#4
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	ah good idea thanks!

4th September 2009, 09:03 PM	#5
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	Russ? Brian?

16th September 2009, 05:16 PM	#7
chatziva diyAudio Member Join Date: Jun 2007 Location: UK	Thank you Russ that's useful!

2nd November 2009, 04:00 AM	#8
MoodySteve diyAudio Member Join Date: Apr 2007	Any word on when Darwins will be back in stock? I've damaged my board by being too rough with the molex connectors. Hard-wiring the bad traces has caused strange problems that I'm getting tired of chasing after.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Kookaburra, MyRef RevC, and Darwin Selector dimensions	stevens	Chip Amps	4	31st January 2007 06:12 AM
Boz AP1.7 Input Selector PCB	Stones	Pass Labs	2	14th November 2006 06:08 AM
input selector	lawbadman	Digital Source	8	10th September 2005 09:45 AM
Input Selector	Semir	Solid State	7	28th December 2004 06:18 AM
Input selector: need help	Cobra2	Parts	1	8th March 2003 07:31 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read