Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

These tube can be use for amplifier
These tube can be use for amplifier
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 2nd April 2007, 03:19 AM   #1
baduong is offline baduong  Antarctica
diyAudio Member
 
Join Date: Aug 2006
Default These tube can be use for amplifier

Dear all

My friend just give me some tube of ECC85 and PC92. I don't know if these tube can be used for amplfier as preamp tube or not. Please give me your advice
  Reply With Quote
Old 2nd April 2007, 03:51 AM   #2
JohnAtwood is offline JohnAtwood  United States
diyAudio Member
 
JohnAtwood's Avatar
 
Join Date: May 2006
Location: Rural Nevada
Default tubes for audio

The ECC85 is a high transconductance dual triode, similar to an ECC88/6DJ8/6922, but with a little less gain. It should work well for audio in circuits where the 6DJ8 type of tube is used, but the bias may have to be re-adjusted.

The PC92 is similar to the EC92, except with a 3.1V heater voltage. The EC92 is the same as a 6AB4, which is 1/2 of a 12AT7/ECC81. Looking at the PC92 data sheet, the PC92 has slightly higher transconductance and mu (amplification factor) than the EC92, but is still quite close. The 12AT7/ECC81 is used in quite a few audio circuits.

So, both of these tubes are usable in audio. Two PC92 could have their heaters wired in series to give about 6.2V, which makes them more useful.

I hope this helps,

- John Atwood
  Reply With Quote
Old 2nd April 2007, 04:20 AM   #3
baduong is offline baduong  Antarctica
diyAudio Member
 
Join Date: Aug 2006
Dear John

Thanks for your your information
  Reply With Quote

Reply


These tube can be use for amplifierHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tube SE amplifier with 6P3S (russian tube) danzup Tubes / Valves 48 6th June 2013 04:51 PM


New To Site? Need Help?

All times are GMT. The time now is 04:51 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki