|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
20th February 2007, 07:17 PM
|
#1 |
|
diyAudio Member
Join Date: May 2002
Location: Lesina (FG) - Italy
|
driving 845 push-pull with a signal from a 300B SE stage
Is it possible to drive a 845 push-pull power stage utilizing the signals taken (through capacitors) from the anode and the cathode of a 300B working in a SE configuration (... with the anode connected to a 3-3.5 Kohm output transformer and the cathod connected to a RC) ?
|
|
|
20th February 2007, 08:04 PM
|
#2 |
|
diyAudio Member
Join Date: Dec 2004
Location: Cincinnati, Ohio
|
A 300B concertina? Anode load is usually resistive here though. If your already using a transformer, it makes more sense to use a center tapped secondary for phase splitting.
__________________
Be sure your foil hat has a good low impedance ground. |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| kobayashi 300B push-pull | n_dori | Tubes / Valves | 15 | 18th November 2008 03:59 PM |
| 300B push pull amp | billr | Tubes / Valves | 5 | 14th July 2008 01:47 AM |
| Push Pull 300B preliminary | zigzagflux | Tubes / Valves | 18 | 28th August 2007 10:14 AM |
| What should B+ on 300B push-pull be? | andy2 | Tubes / Valves | 8 | 12th July 2006 04:33 PM |
| 300B Push-Pull and PSE | mozfet | Tubes / Valves | 1 | 5th August 2002 07:32 PM |
| New To Site? | Need Help? |
| Page generated in 0.07457 seconds (64.10% PHP - 35.90% MySQL) with 10 queries |
