Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Replacing old caps in the SP8 pre-amp
Replacing old caps in the SP8 pre-amp
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 27th January 2007, 10:55 AM   #1
enilsen is offline enilsen  Sweden
diyAudio Member
Join Date: Oct 2006
Question Replacing old caps in the SP8 pre-amp

My Audio Research SP8 is 25 years old now and I was thinking of replacing most of the Capacitors in this pre-amp.

I know there are numerous threads on caps and who's got what and where to get them, but I'm more interested in hearing about those that have actually replaced these parts with success.

In spite of the fact that this pre-amp does sound very good for its age I'm of the impression that heat from the tubes will have to a degree taken its toll on the larger caps as the labelling has started to peal off.

One thing of interest is that the upgraded versions of the SP8 doesn't use as many of those big yellow caps (Electrocube) which mine has a lot of. I can only assume this was due to cost savings on the newer models or maybe the newer replacement parts were of better quality.

Click the image to open in full size.

Click the image to open in full size.
  Reply With Quote
Old 28th January 2007, 01:09 AM   #2
refference is offline refference  Brazil
diyAudio Member
Join Date: Jan 2006
Location: SAO PAULO - SP
Hi ,

Do you want my sincere and humble opinion ???

Do not replace anything !! Let all stuffs stay the
way they are now !!!

If you really want to do anything , replace ONLY
the electrolytic caps in the power supply or eventually
one (s) in the signal path , with brand new ones , it will
be enough !!! Nothing more than that !!

Congratulations , you have a nice equipment .

  Reply With Quote
Old 28th January 2007, 10:42 AM   #3
enilsen is offline enilsen  Sweden
diyAudio Member
Join Date: Oct 2006
I have already replaced the electrolytic caps in the power supply once. They had leaked and there was a noticeable hum when in use.

That was 15 years ago. The rest of the caps could be facing the same faith. I do believe though that "If it aint broke, don't fix it" so this isn't something I'm committed to, but I also recognize the harsh conditions these caps have been thru hence I would like to be prepared.

I have a stock of brand new replacement tubes and I never throw out the old ones just in case I need them some day for comparison (which might never happen).

Murphy's Law works for me and things break all the time so why wait until after the fact. Your advice is well noted as I would have given the same advice to others but for now I don't what to miss a day without this pre-amp.
  Reply With Quote
Old 28th January 2007, 01:33 PM   #4
Eli Duttman is offline Eli Duttman  United States
diyAudio Member
Join Date: Apr 2004
Location: Monroe Township, NJ
IMO, Carlos was on target in suggesting replacement of any 'lytics in the signal path.

As for the "Electrocube" caps., ARC designs use loop NFB, which has a definite homogenizing effect. You should be fine using SCR (France) made Tin foil and polypropylene film parts as replacements. The SCR made caps. are available under Axon, Angela, and L_RD knows what other labels.

I don't know if the "Electrocube" parts really need replacing. The ink used to label the parts could easily be more fragile than the "guts". The photo supplied does not show signs of melted plastic.
Eli D.
  Reply With Quote
Old 28th January 2007, 01:50 PM   #5
Brian Beck is online now Brian Beck  United States
diyAudio Member
Brian Beck's Avatar
Join Date: Dec 2004
Location: South Florida, USA
I agree with Eli. Iíve seen the outer tape sleeves on these plastic film caps come loose. In my experience the epoxy sealed inner workings were still OK. Unless metallized layers become exposed, which Iíve not seen, theyíre probably good. You can always check them with a meter. These parts should last a long time. The electrolytics are another story of course. Were it my SP8, Iíd leave well enough alone.
  Reply With Quote
Old 28th January 2007, 02:09 PM   #6
enilsen is offline enilsen  Sweden
diyAudio Member
Join Date: Oct 2006
Well the picture provided was borrowed from ARCDB to give anyone who's looking an idea of what I'm talking about. My caps still have the writing on them, but the plastic tape used to wrap the caps has pealed and is showing its age.

I suspect Electrocube fell short when producing a quality product by wrapping their labels on the caps instead printing on the cap itself.

In addition to this I also have discolouration around the tube sockets on the print circuit from extended heat exposure and wires that obviously are taking on that crispy look when residing too close to the vacuum tubes. Even the top perforated steel plate is warped and does an interesting buckle when removed.

I'll look into SCR made caps and see if they have some acceptable operating temperatures.
  Reply With Quote
Old 7th February 2010, 08:02 PM   #7
Jaimo is offline Jaimo  Canada
diyAudio Member
Join Date: Oct 2005
Default ARC SP8 Electrolytics

I replaced the Electrolytics on my Rev 7 SP8 with nos Sprague Atoms and this cleaned up some of the 60Hz hum I had been experiencing. There was also an overall improvement in the bottom end performance so I will recommend going this route if you wish to keep your SP8 in stock condition.
  Reply With Quote


Replacing old caps in the SP8 pre-ampHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing multi-section caps with multiple caps? Sir Trefor Parts 1 29th May 2007 11:17 PM
Replacing Caps in HK775? mvarney Solid State 13 20th September 2006 09:18 AM
Replacing the caps in the crossovers... dewdrop Multi-Way 13 22nd February 2006 12:56 AM
Replacing Caps on X-CD88 audioferret Parts 0 1st November 2005 08:06 AM
Replacing ceramic disc caps with silver mica caps? G Solid State 5 18th November 2002 02:02 PM

New To Site? Need Help?

All times are GMT. The time now is 03:47 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio