Looking for a 83 rectifier model

bembel · 26th January 2007, 10:22 AM

Hi all,

I'm restoring a TV-7/U, and I'd like to have a "good" replacement for the 83 mercury vapor rectifier tube.

I'd like to try to simulate some circuits using zeners and then need a 83 model (3F4 type without PARAM) for direct comparison, for now the tube tester have a 83 replacement made of 2 x BYV96e leading to the junction of 2 x 150R, seems OK for calibration voltage, but I suspect a big difference in linearity compared to the 83.

I can also compute it myself, thank to curvecaptor, but I wonder what the accuracy will be, does anyone have yet tried to create gaz filled rectifier with curvecaptor or have a (3F4) 83 model ???

Thanks.

bembel · 26th January 2007, 11:27 PM

hey ! Ain't no experience around ??? (the whole thing to figure out?!?)

(not a lot of time to work on the bench now, I found a lot of work

)

26th January 2007, 10:22 AM	#1
bembel diyAudio Member Join Date: Aug 2006	Looking for a 83 rectifier model Hi all, I'm restoring a TV-7/U, and I'd like to have a "good" replacement for the 83 mercury vapor rectifier tube. I'd like to try to simulate some circuits using zeners and then need a 83 model (3F4 type without PARAM) for direct comparison, for now the tube tester have a 83 replacement made of 2 x BYV96e leading to the junction of 2 x 150R, seems OK for calibration voltage, but I suspect a big difference in linearity compared to the 83. I can also compute it myself, thank to curvecaptor, but I wonder what the accuracy will be, does anyone have yet tried to create gaz filled rectifier with curvecaptor or have a (3F4) 83 model ??? Thanks. __________________ Plus je pédale moins vite, moins j'avance plus vite !

26th January 2007, 11:27 PM	#2
bembel diyAudio Member Join Date: Aug 2006	hey ! Ain't no experience around ??? (the whole thing to figure out?!?) (not a lot of time to work on the bench now, I found a lot of work ) __________________ Plus je pédale moins vite, moins j'avance plus vite !

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bridge rectifier vs Full wave rectifier	hilbert_mostert	Tubes / Valves	4	28th April 2009 08:26 PM
6CJ3 rectifier or 6D22S rectifier	56oval	Tubes / Valves	10	19th April 2007 09:48 AM
Anybody heard about Tarzian Silicon Rectifier for Tube Rectifier Replacement?	zxx123	Tubes / Valves	4	21st February 2005 04:02 AM
6CA5 Rectifier - B2Spice Model	Kashmire	Tubes / Valves	2	26th October 2004 02:58 AM
Integrated Rectifier Bridge VS Rectifier Diodes	Sci	Chip Amps	11	16th July 2004 02:43 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)