ECC86 model

[bembel]

Hi all,
here are some ECC86 models I made (thx curve captor)...

* ecc86 macro model (Koren 8)
.subckt ecc86 P G K
koren8(0.006777025575,-0.0138039555,0.01966925833,1445.768287,-221622.2482,10.16481478,2.510143935,1.077259633)
.ends ecc86b


* ecc86 CircuitMaker model
.subckt ecc86 P G K
Bp P K I=(0.006777025575/1.0e3)*uramp(V(P,K)*ln(1.0+(-0.0138039555)+exp((0.01966925833)+(0.01966925833)* ((1445.768287)+(-221622.2482/1.0e3)*V(G,K))*V(G,K)/sqrt((10.16481478)^2+(V(P,K)-(2.510143935))^2)))/(0.01966925833))^(1.077259633)
.ends ecc86b


------------------------------------------------------------------------------------


* ecc86 macro model (rydel5)
.subckt ecc86 P G K
rydel5(0.06426326887,0.0248503432,11.9694297,5.141 483679,0.4767827094)
.ends ecc86b


* ecc86 CircuitMaker model
.subckt ecc86 P G K
Bp P K I=((0.06426326887/1.0e3)+(0.0248503432/1.0e3)*V(G,K))*uramp((11.9694297)*V(G,K)+V(P,K)+(5 .141483679))^1.5 * V(P,K)/(V(P,K)+(0.4767827094))
.ends ecc86b





------------------------------


hope this could help, happy 2007.

PS: I plan realise 5718 tonight

[bembel]

it seems that curve captor is not that allright with 5718's positive grid voltages !

Any trick around or bug report ???

any help appreciated.

[bembel]

Hi all,
It's 3 times now that I enter 5718's curves into curve captor and it doesn't compute or did wrong sets.
I wonder I it's due to 5718's positive grid voltage (+5 to -9v) ???

Anyhelp will be greatly appreciated, thanks.