|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
7th January 2007, 05:18 PM
|
#1 |
|
diyAudio Member
Join Date: Jun 2005
Location: Los Angeles
|
Schematic please? SRPP with current source cathode follower
I need some help creating a schematic:
- Triode in SRPP (I'll use 5965) with 1k cathode resistor; followed by - a current source loaded cathode follower (I'll use 5687). - So 1/2 to follower and - the other 1/2 as CCS with around 1/4 +B on the grid. I basically need to translate this to a schematic. Help please 
__________________
Cheers ~ Mike |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Cathode follower & SRPP q | Cobra2 | Tubes / Valves | 4 | 22nd February 2008 01:15 PM |
| Best emitter / source / cathode follower topology | borges | Analog Line Level | 20 | 2nd November 2007 11:57 AM |
| Best way to measure cathode follower current | fluckscapacitor | Tubes / Valves | 3 | 25th December 2006 01:38 PM |
| Current Sourced Cathode Follower | dr._sleep | Tubes / Valves | 8 | 27th February 2006 08:46 PM |
| Aleph-type current source, but source follower this time | tschrama | Pass Labs | 4 | 29th July 2005 12:55 PM |
| New To Site? | Need Help? |
