diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Lasers, Tubes, and PCB (http://www.diyaudio.com/forums/tubes-valves/91494-lasers-tubes-pcb.html)

jjimison 3rd December 2006 07:46 AM

Lasers, Tubes, and PCB
 
Hello all! Something wonderful has happened to me! I've been given access to a powerful, professional laser engraver. One of the many things that can be done with this, is the etching of circuit boards. As soon as I heard this, I knew the possibilities for DIY audio gadgetry were limitless!

Does anyone know where to get PCB designs for diy audio hardware that I can feed into my new machine? You know, beyond the simple schematic, I'm looking for the graphic to be etched...


If anyone has any advice, I'd love to hear about it!

Cheers,

-Jeff

Minion 3rd December 2006 08:43 PM

Well there are many PCB designs out there, what in particular are you looking for??

You can also just design your own PCB"s from the schematics, I do it all the Time, actually I have only done One project that was a PCB that I didn"t design (Green Preamp) but all the others were my own PCB designs and were etched by myself and I had absolutly no experience in designing my own PCB"s before hand and most all of them worked out great with a couple of exceptions.....


Cheers


All times are GMT. The time now is 10:32 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2