diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Building 8x2 tube line mixer (http://www.diyaudio.com/forums/tubes-valves/9061-building-8x2-tube-line-mixer.html)

rafafredd 26th December 2002 02:41 AM

Building 8x2 tube line mixer
 
I would like to build a 8x2 tube line mixer.
Anyone have a project or a link to something like that?

I want a good circuit with clean and warm sound.
No eqs, aux, mute etc...
Just LR pan control, volume and master section volume, with LED meters for each channel and for master.
I think its a simple project.

The idea is to get 8 outputs from my DAW, mix it with the little board, push some gain and send to my 1/4" TASCAM tape master record. Then back to my DAW and direct for CD...

I want to combine DAW with the sound of analog mixing and analog mastering. I think this will put some BODY on the sound without using those exciters(?) plugins.

Any Idea is welcome...

Robert Morin 26th December 2002 06:35 AM

tubecad online mag.
 
http://www.tubecad.com/april_may2001/page22.html

go to this link. It is the best I have read unless you don't mind going to a BIG library and thumming through old magazines from the 1950's.

This is not a really easy project.

Robert Morin


All times are GMT. The time now is 08:48 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2