Some cathode follower questions - Page 2

SY · 9th November 2006, 06:08 PM

I'll let ashok do all my typing for me.

Nordic · 9th November 2006, 08:25 PM

You guys see to have put me on the right track, it would seem a cathode follower is not neccesarily the best thing to have as a first stage....

Nordic · 9th November 2006, 09:08 PM

Quote:

Originally posted by ashok
What's your output voltage requirement and what is the load ?
Lets say a max of 5 volts output into a 10K ohm load .
Then the max current would be 5/10K = 0.5mA .
You need more than that ?

The imput impedance of the chip amplifier is 100Kohm and the gain is 30 dB

9th November 2006, 06:08 PM	#11
SY diyAudio Moderator Join Date: Oct 2002 Location: Chicagoland Blog Entries: 1	I'll let ashok do all my typing for me. __________________ If there's a sucker born every minute, where do the rest of them come from?

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
cathode follower	vlljpior	Tubes / Valves	6	22nd March 2005 07:50 PM
Question about direct coupling a anode follower into a cathode follower.	G	Tubes / Valves	45	29th July 2004 06:47 PM
cathode follower	ackcheng	Tubes / Valves	2	6th July 2004 03:12 PM
Cathode Follower? Yay or nay?	SHiFTY	Tubes / Valves	25	16th March 2004 06:38 AM
cathode follower	olvrkrg	Tubes / Valves	3	21st February 2004 09:49 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

9th November 2006, 08:25 PM	#12
Nordic diyAudio Member Join Date: Sep 2005	You guys see to have put me on the right track, it would seem a cathode follower is not neccesarily the best thing to have as a first stage....