|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
31st October 2006, 11:36 PM
|
#1 |
|
diyAudio Member
Join Date: Jan 2002
Location: somewhere in Australia
|
how to set current in G Pimm's latest self-biasing CCS circuit?
here's the circuit: http://home.pacifier.com/~gpimm/self_bias.htm
I was going to measure the voltage across R1 and use ohm's law to derive current but I'm not sure if R1 is the place to check. or maybe it is the wrong way to check. The amp is not connected to the B+. I have connected the transformer, tube rectifier, LC filter (10H + 10uF) and G Pimm's circuit. nothing else is connected after the CCS circuit. any ideas? thanks for the help. |
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Gary Pimm's self biasing CCS - parts | jkeny | Solid State | 5 | 18th May 2008 05:01 AM |
| how to set output current on G Pimm's CCS circuit? | jarthel | Tubes / Valves | 2 | 24th April 2007 05:08 AM |
| has anyone kept a copy of gpimm's latest self-biasing CCS? | jarthel | Tubes / Valves | 2 | 22nd January 2007 01:12 AM |
| gary pimm's latest self-biasing CCS circuit | jarthel | Tubes / Valves | 13 | 6th October 2006 04:16 AM |
| Newly CCS circuit from Pimm | mrstone | Tubes / Valves | 0 | 16th February 2004 09:04 AM |
| New To Site? | Need Help? |
| Page generated in 0.05224 seconds (77.82% PHP - 22.18% MySQL) with 10 queries |
