|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
31st October 2006, 07:26 PM
|
#1 |
|
diyAudio Member
Join Date: Apr 2003
Location: papendrecht
|
Low pass active tube crossover
Hello Diy members,
I am looking for a schematic of a tube active crossover . I am only going to use the Low pass output ,crossover frec. is 160Hz Steve Bench has a nice design based on the 6dj8-ecc88 has anyone any experience with this design? Or has anyone built something similar? All info is welcome. 
|
|
|
1st November 2006, 03:30 AM
|
#2 |
|
diyAudio Member
Join Date: Aug 2006
|
Try TubeCad's Filter Designer
Hey Martin,
Are you aware of John Broskie's Filter Designer? $12.95 but worth every penny, just like all his software. |
|
|
|
1st November 2006, 03:30 AM
|
#3 |
|
diyAudio Member
Join Date: Jul 2006
|
Steve Bench Projects
Dear DIY Martin,
I am sorry if this is a duplicate message. Somehow I lost the previous reply I posted. I have never built or heard Steve Bench's active tube crossover, but I have built his 6088 battery-powered phono (only) pre-amp. I enjoyed building and listening to vinyl through this phono pre-amp. His discription of the pre-amp sonics are very good and accurate. He does not provide a description of the sonics for the active tube crossover, but I would expect that they would be good. I have also built a DIY Seduction phono pre-amp using the 6DJ6, which has good sonics. mark845 |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| FS: MARCHAND ACTIVE TUBE CROSSOVER XM-126 3-WAY (Make offer) | Strativari | Swap Meet | 2 | 29th January 2009 04:20 PM |
| Master Volume for Active Tube Crossover? | TubeHead Johnny | Tubes / Valves | 4 | 13th January 2008 07:18 PM |
| Tube active low pass crossover | Diy martin | Full Range | 2 | 2nd November 2006 04:48 PM |
| high pass crossover - active, passive, simple or complex? | nick78 | Parts | 1 | 23rd May 2006 06:43 AM |
| Looking for an active crossover design (low pass only)? | Graemedench | Solid State | 5 | 28th August 2004 12:25 PM |
| New To Site? | Need Help? |
| Page generated in 0.08976 seconds (75.69% PHP - 24.31% MySQL) with 10 queries |
