SS No R No C Power Supply for Tubes

Audio_idiot · 26th September 2006, 01:33 AM

Hi,
I am a newbie in electronics, please pardon me for my poor english & stupid questions.

I was very interested in power supply without R and C, as inspired by
http://members.aol.com/sbench/norchv.html

I hope the toob fans won't bash me for suggesting SS in tube amps... I do not have the free access to the vast veriety of valve where I am, so I have to think of SS equivalent...

I am wondering if this can be done by SS diode to replace the voltage regulator, rectifier valves...etc?

Cheers

ray_moth · 26th September 2006, 08:36 AM

Did you read what Steve said about not using damper diodes because they don't have enough internal impedance? Well, that applies even more to SS diodes, because they have virtually no impedance. This circuit relies on series impedance of the various stages of the power supply. It isn't really resistance-free, just resistor-free and it uses regulators instead of capacitors. You need a different design if you want to use SS.

26th September 2006, 01:33 AM	#1
Audio_idiot diyAudio Member Join Date: Feb 2006 Location: Malaysia	SS No R No C Power Supply for Tubes Hi, I am a newbie in electronics, please pardon me for my poor english & stupid questions. I was very interested in power supply without R and C, as inspired by http://members.aol.com/sbench/norchv.html I hope the toob fans won't bash me for suggesting SS in tube amps... I do not have the free access to the vast veriety of valve where I am, so I have to think of SS equivalent... I am wondering if this can be done by SS diode to replace the voltage regulator, rectifier valves...etc? Cheers __________________ Audio_Idiot

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Using Horizontal Output Tubes - Power Supply	gingertube	Tubes / Valves	8	29th September 2008 06:50 PM
stereo push pull amp one heater supply for power tubes	nhuwar	Tubes / Valves	5	3rd February 2007 02:32 AM
Tubes power supply 220 t0 300V ?	wrangler	Tubes / Valves	2	3rd September 2006 02:36 PM
Use tubes for 2000V. power supply,	extremy	Tubes / Valves	1	17th April 2004 03:55 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

26th September 2006, 08:36 AM	#2
ray_moth diyAudio Moderator Emeritus Join Date: Jan 2004 Location: Jakarta	Did you read what Steve said about not using damper diodes because they don't have enough internal impedance? Well, that applies even more to SS diodes, because they have virtually no impedance. This circuit relies on series impedance of the various stages of the power supply. It isn't really resistance-free, just resistor-free and it uses regulators instead of capacitors. You need a different design if you want to use SS.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)