Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Heaters for cathodes with a large swing
Heaters for cathodes with a large swing
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st August 2006, 02:27 PM   #1
lndm is offline lndm  Australia
diyAudio Member
 
Join Date: Mar 2006
Location: nsw
Default Heaters for cathodes with a large swing

I want to contain a mu stage within +/- 300V, for direct coupling purposes. My problem is the (upper) heater to cathode insulation. This stage is not meant to swing the entire 600V but it would try to, given half a chance and I don't want any surprises.

Is there anything wrong with just tying the heater to the cathode? Alternatively, what can I expect if I just float it at 40V or so?
  Reply With Quote
Old 21st August 2006, 03:02 PM   #2
Brian Beck is offline Brian Beck  United States
diyAudio Member
 
Brian Beck's Avatar
 
Join Date: Dec 2004
Location: South Florida, USA
I have done that and it can work fine. The heater transformer must have low capacitance between the secondary and the primary windings to avoid loading the cathode. I used split bobbin types which measure mere tens of picofarads between windings. The heater supply can be a fully regulated DC supply so long as there is no connection to ground except for small stray capacitance. In that case the cathode is connected to the negative terminal of the heater supply so that the heater is always slightly positive relative to the cathode. I also added a 10K safety resistor from cathode to the supply, just for some additional isolation.
__________________
Brian
  Reply With Quote

Reply


Heaters for cathodes with a large swingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Any 9- pin rectifier tubes with separate cathodes? Lingwendil Tubes / Valves 20 20th June 2009 04:57 PM
Transformer in the cathodes ?? Shoog Tubes / Valves 20 10th April 2009 04:46 PM
FS: Large inductors, Large Ports, and Leaky Holes luvdunhill Swap Meet 10 6th March 2009 03:01 PM
Pentodes without cathodes? Hendrixon Tubes / Valves 9 3rd April 2007 01:06 AM
Directly heated cathodes, but why? Hesky Tubes / Valves 12 8th June 2004 12:18 AM


New To Site? Need Help?

All times are GMT. The time now is 10:04 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright ©1999-2017 diyAudio
Wiki