diyAudio (
-   Tubes / Valves (
-   -   'scoping tube amps (

dave dove 17th August 2006 05:52 PM

'scoping tube amps
is there a definitive guide to using a 'scope with tube amps
particularly for tracking down noise


SY 17th August 2006 09:59 PM

Tektronix has a very complete guide to scope usage on their site. For tube amp specifics, I'd recommend Morgan Jones's "Building Valve Amplifiers" which has a pretty thorough examination of scopes and tube circuit troubleshooting.

lndm 17th August 2006 10:25 PM

When I used to use a scope that itself was built around valves, I appreciated the vertical 50V/div. Nowadays I make do with 5V/div. An attenuating probe for me is essential.

pmillett 18th August 2006 02:24 PM

Take a look at "Oscilloscope Techniques" (especially chapter 7) on by book page:

All times are GMT. The time now is 12:19 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2