6A3/6B4G/6S4S(2A3/2S4S) project - Page 3 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves
Home Forums Rules Articles diyAudio Store Gallery Wiki Blogs Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st May 2009, 08:39 PM   #21
diyAudio Member
Join Date: Jan 2006
Location: vizcaya
Send a message via MSN to feralmeida Send a message via Yahoo to feralmeida
By all means!!
My respect to the other members, with its valuable contribution!
  Reply With Quote
Old 25th April 2016, 10:45 AM   #22
diyAudio Member
Join Date: Sep 2015
Originally Posted by widowmaker View Post
The project was "slightly" modified
Here is the last version:
I am planning to build SE tube amp with 6S4S russian tubes.
Unfortunately the link you sent, modified scheme I can't access.
Can you send me the modified scheme for SE Tube amp with 6S4S tubes?
Thanks in advance.
Regards Vojin
  Reply With Quote
Old 25th April 2016, 03:43 PM   #23
diyAudio Moderator
jazbo8's Avatar
Join Date: Jan 2011
Location: In Transient
You should start a new thread, he posted in 2006!
  Reply With Quote
Old 25th April 2016, 05:10 PM   #24
diyAudio Member
Join Date: Sep 2015
Default 6S4S Tube Amp scheme

Sorry, mea culpa!
I didn't know the the rules for old/new threads.


  Reply With Quote
Old 25th April 2016, 05:21 PM   #25
diyAudio Moderator
jazbo8's Avatar
Join Date: Jan 2011
Location: In Transient
It's not a rule, just a suggestion, or you can try to contact widowmaker via PM.
  Reply With Quote
Old 25th April 2016, 06:11 PM   #26
diyAudio Member
Join Date: Sep 2015
Well, my idea was to address the question directly
to the person. Obviously I made it wrong way.
Thank you, anyway.
I'll try again.
  Reply With Quote
Old 25th April 2016, 06:28 PM   #27
Bigun is offline Bigun  Canada
diyAudio Member
Bigun's Avatar
Join Date: Jan 2009
Location: Waterloo, ON or Herefordshire
Blog Entries: 2
This is a good thread, perfectly OK to dig up old threads, I do it all the time

so, 6C4C. It's pretty much the same as 2A3. I think you can choose one of the many different designs for 2A3. What will need to be different is the filament heating supply. The heater voltage is 6.3V and likely at this voltage you will experience hum in the speaker unless you use DC instead of AC heating. I know some people were happy with AC heating but mostly I see people use DC with this tube.

I have a few of these triodes and am considering using them in SE too.
"The test of the machine is the satisfaction it gives you. There isn't any other test. If the machine produces tranquility it's right. If it disturbs you it's wrong until either the machine or your mind is changed." Robert M Pirsig.
  Reply With Quote
Old 4th May 2016, 10:38 AM   #28
diyAudio Member
widowmaker's Avatar
Join Date: Nov 2004
Location: Sofia, Bulgaria
Send a message via ICQ to widowmaker
Here is the updated schematic of that amp.
Please, adjust cathode resistor of the output
stage in such a way that you have about 66-68mA
anode current. And don't worry about higher power
dissipation of output triode, I have several amplifiers
with more than 20W dissipation and they still work.
(about 7-8 years without any changing of bulbs)
Attached Images
File Type: gif 6S4S_6N6P.GIF (49.3 KB, 219 views)
High Tension Wires Department
Daniel Petrov also known as widowmaker

Last edited by widowmaker; 4th May 2016 at 10:43 AM.
  Reply With Quote
Old 4th May 2016, 10:48 AM   #29
diyAudio Member
Join Date: Feb 2012
Location: Ireland
I am currently building a SET using 6C4C tubes and Rod coleman filament regulators. It is so quiet i also use it as a headphone amp with HD800's

Last edited by mcandmar; 4th May 2016 at 10:51 AM.
  Reply With Quote
Old 4th May 2016, 10:53 AM   #30
diyAudio Member
Join Date: Feb 2007
Location: Tashkent
I agree, that these interstage tantalum lytics are good, they do not increase impedance at high frequencies as ordinary lytics. But, is it really good idea to connect them in chain, soundwise and reliabilitywise?
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
running 6S4S/6C4C hot .. calling widowmaker makeb4break Tubes / Valves 27 8th February 2009 09:25 PM
6C4C - 6S4S - 6B4G op points? danFrank Tubes / Valves 2 6th December 2006 06:51 AM
The 6b4g alexmoose Tubes / Valves 4 1st October 2006 10:02 PM
Another PP 6B4G Ciscokid Tubes / Valves 3 24th July 2006 10:26 AM
Help with 6B4G PP amp. AudioGeek Tubes / Valves 4 17th July 2005 02:53 AM

New To Site? Need Help?

All times are GMT. The time now is 02:44 AM.

vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright 1999-2017 diyAudio

Content Relevant URLs by vBSEO 3.3.2