diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Tube Bogen J330 PA amp (http://www.diyaudio.com/forums/tubes-valves/81820-tube-bogen-j330-pa-amp.html)

Preacher 20th June 2006 02:03 PM

Tube Bogen J330 PA amp
 
I have a tube bogen j 330 with 2 Jensen alnico 12's.

I got this great clean amp and it powered up and worked great for hours, but then the main capacitor had a meltdown. I took it to an elec . shop but the guy there was a nitwit. Long story short; I don't know what value capacitors this takes. The original was a single can with 2 or 3 different cap values inside.

Any suggestions?

karma 20th June 2006 02:33 PM

post a pic of the cap;)

values should be stamped on the side

Tom Bavis 20th June 2006 02:35 PM

Service info (schematic, parts list) is in Sams Photofact folder 291-5 - I don't think I have it. Check your library.

Preacher 21st June 2006 01:54 PM

The service center where I took it lost the original cap. I'm sure my library doesn't have any photofact books. There is a city an hour or so which may have it.

Thanks for the responses. If anyone else has an idea let me know.

Enzo 22nd June 2006 12:31 AM

Forget the can. Mount axial lead caps somewhere convenient. The 22uf @ 500v caps are readily available adn inexpensive. So I would use a couple of them. If you then decide there needs to be more filtration, you can change to a larger cap. The 22/500 is as good a starting point as any. If yours has a voltage doubler, then maybe a couple 40uf instead.

Preacher 25th June 2006 07:49 AM

Thanks again for the advice. What about one of these?

http://www.partsexpress.com/pe/showd...number=020-602

What would be the effects of using the wrong value?


All times are GMT. The time now is 08:20 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2