• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

1st Post (here) : ) My first project: Boozhound Amp

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
BoozHoundLabs BLH-15

A very ordinary guitar amp, lots of room for improvement. 10 watts on a good day, lots of 3rd harmonic distortion in this form. The 30H choke in the phase inverter cathodes is a significant improvement over the resistor normally found at this position. The choke is a Hammond 157G.:)
 

Attachments

  • BoozeHound Amp bhl-15-values 10.5W.jpg
    BoozeHound Amp bhl-15-values 10.5W.jpg
    191.6 KB · Views: 74
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.