CLCRC power supply config

jarthel · 26th May 2006, 12:22 AM

just a question in regards to the config mentioned above.

Does it always have to be a capacitor as the 1st component after the tube? Can it be a RCRCLC?

I asked as with PS Designer, it can be anything and I'm not really sure if there are sonic benefits with one or the other.

Thanks for the reply.

Geek · 26th May 2006, 12:48 AM

C-R-C or C-L-C or L-C, but straight R-C just makes heat with no benefit.

jarthel · 26th May 2006, 01:46 AM

Quote:

Originally posted by Geek
C-R-C or C-L-C or L-C, but straight R-C just makes heat with no benefit.

thanks

arnoldc · 26th May 2006, 05:52 AM

I used an RCRCRC to bring down the B+ for one of my preamp...

26th May 2006, 12:22 AM	#1
jarthel diyAudio Member Join Date: Jan 2002 Location: somewhere in Australia	CLCRC power supply config just a question in regards to the config mentioned above. Does it always have to be a capacitor as the 1st component after the tube? Can it be a RCRCLC? I asked as with PS Designer, it can be anything and I'm not really sure if there are sonic benefits with one or the other. Thanks for the reply.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need suggestion about power supply config consideration	goldkenn	Chip Amps	6	11th June 2008 03:12 PM
EL 84 Pentode Config.	SINGLEENDED	Tubes / Valves	26	5th April 2007 01:27 PM
Correlation-Sound and Power Supply Config	fmak	Digital Source	1	26th January 2006 07:13 PM
heater supply (xformer specs are 6.3V 2.5A) as supply for a power LED?	jarthel	Tubes / Valves	10	21st July 2003 01:30 PM
need help on my config	hacknet	Solid State	14	2nd December 2002 03:43 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

26th May 2006, 12:48 AM	#2
Geek diyAudio Member Join Date: Sep 2004	C-R-C or C-L-C or L-C, but straight R-C just makes heat with no benefit.

26th May 2006, 05:52 AM	#4
arnoldc diyAudio Member Join Date: Apr 2003 Location: Makati	I used an RCRCRC to bring down the B+ for one of my preamp...

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)