diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   12AU7 tube preamplifier schema (http://www.diyaudio.com/forums/tubes-valves/79259-12au7-tube-preamplifier-schema.html)

vnarchitect 9th May 2006 07:59 AM

12AU7 tube preamplifier schema
 
I need 12AU7 tube preamplifier schema. I have intend DIY a simple preamplifier with best quality.

ErikdeBest 9th May 2006 06:00 PM

Hi vnarchitect

I see you are director! Very impressive, and that is probably also the reason you are also a very busy man, fact I recognise from 1 - you do not state what you need from your preamp, 2 - you did not perform a search at this forum or the internet to see the available schematics and 3 - that you don't know that best quality and 12AU7 hardly go together.

tell us, what do you want exactly?

Alain Dupont 9th May 2006 06:12 PM

vnarchitect,

Take a look at John's site:

http://www.tubecad.com/2005/January/blog0030.htm
http://www.tubecad.com/2006/04/blog0059.htm#07Apr2006

There is an Aikido for 9-Pin inputs / outputs 12AU7 etc

PS: I has done the pcb's also:
http://store.yahoo.com/glass-ware/aikamp9pinbo.html

But you can also build one without pcb ; it's simple and of the "best quality"

Regards.

Alain.

Alain Dupont 9th May 2006 07:01 PM

vnarchitect,

On the other side of the sea... The KTR from André Cocheteux with 12AT7 tubes...

There is a serie of articles in:
http://www.homecinema-fr.com/forum/

A SRPP praised of high level ; published in revue LED 182/183

http://isasarl.com/ goto: publication / preamplificateur

The upgraded version with 5725 tubes is of the highest level!
http://isasarl.com/ goto: publication / Optimisation

Even if this is a "french site" lot's of schematics are self explanatory.

Alain. ;)

jmartins 10th May 2006 05:35 PM

See:
http://www.diyaudio.com/forums/showt...0&pagenumber=1



[]“s
Joćo

pmonti 11th May 2010 04:21 PM

Valve Preamp 5725 Schematic
 
Hello, somebody have a nice 5725 valve preamp in triode mode? Thanks and Best regards. Maybee can put directly in EF86 design? im newby in valves. Best regards...

mashaffer 12th May 2010 01:07 AM

I thought he said simple. :) As I recall the original BH foreplay was a simple RC coupled CC 12AU7 and got pretty good reviews. No doubt the trick is in setting the proper operating point.


All times are GMT. The time now is 06:30 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2