• WARNING: Tube/Valve amplifiers use potentially LETHAL HIGH VOLTAGES.
    Building, troubleshooting and testing of these amplifiers should only be
    performed by someone who is thoroughly familiar with
    the safety precautions around high voltages.

Big tube - what is it?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have a huge tube warning for X-rays, 300 mm high, 80 mm diameter. The tube is in it's original box. Can anyone tell me something?
 

Attachments

  • tube_front.jpg
    tube_front.jpg
    50.2 KB · Views: 690
It is a switch.

The hydrogen gas allows ionization to occur easier.

It is non linear.

It is used for things like pulsed radar. Also, as a crowbar, for cases when relays cannot open fast enough, this is triggered to shunt the voltage.

It remains latched till the current goes below a holding current.

It's like an SCR.

It has x-ray warnings because the voltage it can handle is sufficient that the electrons cause emission when they hit the anode..

Cheers, John
 
Well, get it to fire fast enough for class-D

That is not a problem!, hydrogen thyratrons have extremely fast turn on and can switch very high currents, they are in most cases faster than solid state alternatives, this one can switch currents of up to 500A at a rate of 2500A/us.

The problem in building a class D amp with these is that they turn off slowly as the plasma need to break down.

Regards Hans
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.