strange thing with AMC 2030

testarossa2k · 19th April 2006, 01:27 PM

Hi,
I bought an AMC 2030 power amplifier, the sound is fastastic and it's all ok but the LED is not in the right place. I mean the green lamp is not in the hole on the front side of the amplifier but I can see from the grid on the top that the LED is alight.

Could I safely open the amplifier, naturally off and with the plug off the wall, and put the lamp in the right place?
because here in Italy there isn't an official distributor so there isn't any support, there is just one online store that sells this amp and I would have to send it back, and maybe they're out of stocks or they just fix the light the same way I would do myself....

I have also pics to show, I'm waiting to recharge the batteries...

thank you

anatech · 19th April 2006, 01:29 PM

Hi testarossa2k,
Yes, no problem doing that. Leave the amp unplugged for a while to allow the supplies to discharge and move the LED. Make sure the leads do not short.

-Chris

19th April 2006, 01:27 PM	#1
testarossa2k diyAudio Member Join Date: Dec 2005 Location: Bologna	strange thing with AMC 2030 Hi, I bought an AMC 2030 power amplifier, the sound is fastastic and it's all ok but the LED is not in the right place. I mean the green lamp is not in the hole on the front side of the amplifier but I can see from the grid on the top that the LED is alight. Could I safely open the amplifier, naturally off and with the plug off the wall, and put the lamp in the right place? because here in Italy there isn't an official distributor so there isn't any support, there is just one online store that sells this amp and I would have to send it back, and maybe they're out of stocks or they just fix the light the same way I would do myself.... I have also pics to show, I'm waiting to recharge the batteries... thank you

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TDA 2030 as headphone amp	Puffin	Headphone Systems	2	17th May 2009 11:57 AM
AMC CVT 2030 Output Transformer.	Matthewong	Tubes / Valves	52	8th January 2009 05:07 PM
Amplif mono with 4 x TDA 2030	dsasorin	Chip Amps	8	26th September 2007 09:42 AM
marantz 2030	odysseybmx414	Solid State	2	11th January 2007 09:57 PM
strange "thing"	svokke	Tubes / Valves	22	27th March 2004 02:06 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read

19th April 2006, 01:29 PM	#2
anatech diyAudio Moderator Join Date: Jun 2004 Location: Georgetown, On	Hi testarossa2k, Yes, no problem doing that. Leave the amp unplugged for a while to allow the supplies to discharge and move the LED. Make sure the leads do not short. -Chris

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)