diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   Fender Adjustments (http://www.diyaudio.com/forums/tubes-valves/77309-fender-adjustments.html)

JDeV 7th April 2006 04:10 PM

Fender Adjustments
 
Bussy repairing a Studio Bass for a friend. There are 2 POT's at the rear: HUM adjust and TUBE balance adjust.
What is the correct procedure for setting this up?

Thanx for any assistance.

blacklight 7th April 2006 06:26 PM

http://www.schematicheaven.com/fender.htm

Bottom of the page.

testlab 7th April 2006 06:40 PM

You may want to convert the bias adjustment from a balance type. This adjustment merely divides the bias evenly between the tubes instead of accurately setting the idle current.

JDeV 7th April 2006 07:03 PM

Quote:

Originally posted by blacklight
http://www.schematicheaven.com/fender.htm

Bottom of the page.

Thanx for the link. I also fond this one, very good quality, still need to know how to adjust these POT's for best results.

http://www.albertkreuzer.com/pics/el...studiobass.gif

Netlist 7th April 2006 08:06 PM

I'm sure you'll find the answer in this link:
http://www.fenderforum.com/forum.htm...15:57&offset=0

/Hugo

blacklight 7th April 2006 08:13 PM

Ach, sorry. I thought you meant how to install new pots. Well, cheers anyway.

poobah 7th April 2006 08:17 PM

With a shorting on the input... or no input at all; connect a voltmeter from plate to plate (pin 3) on the output tubes. With the amp warmed up well, adjust the matching pot for zero volts. This matches the idle current (basically) through the tubes.

If the tubes are new, you may want to do this again after tubes have some hours on them.

With that done... simply adjust the hum balance for minimum audible hum at the speaker.


All times are GMT. The time now is 04:30 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2