diyAudio

diyAudio (http://www.diyaudio.com/forums/)
-   Tubes / Valves (http://www.diyaudio.com/forums/tubes-valves/)
-   -   How to use Svetlana 6d22s? (http://www.diyaudio.com/forums/tubes-valves/73167-how-use-svetlana-6d22s.html)

protos 2nd February 2006 03:00 PM

How to use Svetlana 6d22s?
 
I want to use these tubes in a full wave c.t. rectifier.
Does anyone know what R and C values should immediately follow the recitfier so it does not overload?
It is not on the data sheet.

Eli Duttman 3rd February 2006 12:15 AM

Damper diodes are highly resistant to arc over. Also, they are designed to deal with high current pulses. 40 muF. is almost certainly safe and even 68 muF. may be OK.

kathodyne 3rd February 2006 03:39 AM

hi i use PY500A damper diodes(reasonably similar to 6d22s), and have 47uF as input, no problem whatsoever
Have a look at triodedick's goliath , he seems to have had some trouble with the 6d22s......

i'd like to try them also, because they are cheaper then py500a, and if they can do the trick.....!!!

wirstinson 3rd February 2006 04:51 AM

Hi , you may tray this link:
http://216.87.144.102/svetlana/TechB...chnoteNo52.asp
I hope you find useful information here.
Saludos.


All times are GMT. The time now is 07:28 PM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright 1999-2014 diyAudio


Content Relevant URLs by vBSEO 3.3.2