SE 1.5W OTL

audio3chung · 24th January 2006, 10:16 AM

I wonder is there anyone in the forum has scratch the SE1.5WOTL
of Transcendentsound?
I really want to build one.
Schematic wanted!

CHOW

Bas Horneman · 24th January 2006, 10:31 AM

Hallo Chow,

I would also be interested to build something like that as I have 8 of those 6c19pi tubes lying about idly.

Should not be too hard. I suppose it would just be 4 * 6c19pi in parallel..configured as a cathode follower, with a big fat output cap. Just add a driver stage (6H30pi) and voila.

The only "tricky bit" is to ensure the same amount of current is flowing through each tube...but you can always do that later...

I'll try to come up with something one of these days.

Regards,
Bas

Bas Horneman · 24th January 2006, 10:55 AM

Actually preventing damage to the loudspeaker during startup and switching off will be my biggest challenge....

reinhard · 24th January 2006, 01:19 PM

Not so simple,

4 * 6C19 in parallel as cathode follwer and a cap?

Where is the current coming from? Resistor? Inductor?

Reinhard

Bas Horneman · 24th January 2006, 01:59 PM

Quote:

Where is the current coming from? Resistor? Inductor?

Not sure..isn't the current set by the cathode resistors?

Would a cathode follower not be the way to do it?

reinhard · 24th January 2006, 02:01 PM

Think you don`t get 1,5 Watt from a resistor.

Reinhard

Bas Horneman · 24th January 2006, 02:05 PM

Quote:

Think you don`t get 1,5 Watt from a resistor.

That shows you how little I know

Ok...I give up..how is it done

reinhard · 24th January 2006, 02:07 PM

Hi Bas.

output stage is working on an 320 mH 600 mA Inductor as cathode follower, each tube has an additional 5 Ohm resistor for better current sharing.

Have the schematic, but don´t ask, think it is intelectuell property of Bruce Rozenblit.

Reinhard

reinhard · 24th January 2006, 02:10 PM

That shows you how little I know

don´be shy, Bas

Bas Horneman · 24th January 2006, 02:28 PM

Quote:

Have the schematic, but don´t ask, think it is intelectuell property of Bruce Rozenblit.

Hi Reinhard...I won't ask.

The info you gave me should be enough for me to rig something up that will work.

24th January 2006, 10:16 AM	#1
audio3chung diyAudio Member Join Date: Sep 2005	Se 1.5w Otl I wonder is there anyone in the forum has scratch the SE1.5WOTL of Transcendentsound? I really want to build one. Schematic wanted! CHOW

24th January 2006, 10:31 AM	#2
Bas Horneman diyAudio Moderator Emeritus Join Date: Apr 2002 Location: The Netherlands Blog Entries: 18	Hallo Chow, I would also be interested to build something like that as I have 8 of those 6c19pi tubes lying about idly. Should not be too hard. I suppose it would just be 4 * 6c19pi in parallel..configured as a cathode follower, with a big fat output cap. Just add a driver stage (6H30pi) and voila. The only "tricky bit" is to ensure the same amount of current is flowing through each tube...but you can always do that later... I'll try to come up with something one of these days. Regards, Bas __________________ Boatanchor amps forum My "adventures" in audio

24th January 2006, 10:55 AM	#3
Bas Horneman diyAudio Moderator Emeritus Join Date: Apr 2002 Location: The Netherlands Blog Entries: 18	Actually preventing damage to the loudspeaker during startup and switching off will be my biggest challenge.... __________________ Boatanchor amps forum My "adventures" in audio

24th January 2006, 02:07 PM	#8
reinhard diyAudio Member Join Date: Dec 2000 Location: Germany	SE OTL Hi Bas. output stage is working on an 320 mH 600 mA Inductor as cathode follower, each tube has an additional 5 Ohm resistor for better current sharing. Have the schematic, but don´t ask, think it is intelectuell property of Bruce Rozenblit. Reinhard

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

24th January 2006, 01:19 PM	#4
reinhard diyAudio Member Join Date: Dec 2000 Location: Germany	Not so simple, 4 * 6C19 in parallel as cathode follwer and a cap? Where is the current coming from? Resistor? Inductor? Reinhard

24th January 2006, 02:01 PM	#6
reinhard diyAudio Member Join Date: Dec 2000 Location: Germany	Think you don`t get 1,5 Watt from a resistor. Reinhard

24th January 2006, 02:10 PM	#9
reinhard diyAudio Member Join Date: Dec 2000 Location: Germany	That shows you how little I know don´be shy, Bas

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read