Hello
First of all, sorry for my bad English.
So I´m building an amp with this schematic
http://www.bonavolta.ch/hobby/en/audio/kt88_1.htm
and I have a question about connecting Hammond 1627SE OPT to that amp.
Blue/yellow goes to pin 4, that I know...
But shoul I put Red or Blue wire to pin 3?
I´m building my first amp...
Thanks a lot!
First of all, sorry for my bad English.
So I´m building an amp with this schematic
http://www.bonavolta.ch/hobby/en/audio/kt88_1.htm
and I have a question about connecting Hammond 1627SE OPT to that amp.
Blue/yellow goes to pin 4, that I know...
But shoul I put Red or Blue wire to pin 3?
I´m building my first amp...
Thanks a lot!
From Hammond site: http://www.hammondmfg.com/1627.htm
Schematic & Hook Up Data:
SE Schematic
Notes:
- RED wire connects to B+
- BLUE/YELLOW wire connects to screen (optional use)
- BLUE wire connects to the tube plate
- The 1642SE & 1638SEA do not include a primary screen tap (as they are designed for triode applications).
Look up tube pin layout for your tube>
Steve
Schematic & Hook Up Data:
SE Schematic
Notes:
- RED wire connects to B+
- BLUE/YELLOW wire connects to screen (optional use)
- BLUE wire connects to the tube plate
- The 1642SE & 1638SEA do not include a primary screen tap (as they are designed for triode applications).
Look up tube pin layout for your tube>
Steve
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.