|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
17th January 2006, 11:44 AM
|
#1 |
|
diyAudio Member
Join Date: Oct 2004
|
£¸£´£µ no dc passing the opt
Hello everyone,for the following schematic,is the 3.5k impendance too small for the 845?and what's the use of the 20H connect with the V+ and the plate of the 845? i thing the output power is nearly 15Watts,is that right? thanks !
|
|
|
17th January 2006, 11:49 AM
|
#2 |
|
diyAudio Moderator
|
If you have to ask this, you shouldn't be handling 820V circuits with expensive parts. Best start on something less ambitious, then work your way up.
__________________
Listening to records is like ****ing a picture of Brigitte Bardot. - Sergiu Celibidache |
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Question regarding LM317 & 100kHz Fsw SMPS passing through | davefromnj | Power Supplies | 2 | 29th September 2007 07:11 PM |
| Best caps for signal passing | rtarbell | Parts | 16 | 4th December 2005 07:40 AM |
| My subwoofer plate amp passing high freq | muhy3 | Subwoofers | 3 | 11th February 2005 12:52 AM |
| New To Site? | Need Help? |
| Page generated in 0.06213 seconds (71.98% PHP - 28.02% MySQL) with 11 queries |
