Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Need Help. Anyone with Philips AG 9016??
Need Help. Anyone with Philips AG 9016??
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th January 2006, 07:52 PM   #1
Chrisssssssss is offline Chrisssssssss  Canada
diyAudio Member
 
Join Date: Nov 2004
Location: Vancouver B.C. Canada
Default Need Help. Anyone with Philips AG 9016??

Hello all,

I need a bit of help here. I have a Philips AG 9016n tube amp that had a bit of a meltdown and I burnt out a resistor that I now cannot read the values of and it is not listed on the schematic diagram that I have of it. It is the resistor (biggie) that is located across the two fuses. It is the large one that is soldered to the fuses.

I need to replace this resistor so I can get it up and running again. I have the schematic for it, however it is not located anywhere on it (at least not anywhere that I can find it...) If someone has this amp and either knows the value of this resistor, or could take a quick minute and use a multimeter and find out the value (or just read me out the colors on the side of the resistor would be ok too...!!!)

Also if anyone knows any easy mods that might spruce up this little guy that would be greatly appreciated. I love this little amp as it sounds great. It is relatively original, except for this resistor that I fried and it is in mint shape. I will be replacing the little black capacitors that are on the transformers with new ones as suggested in another thread. That's about all that I plan on doing because I would like to keep it relatively stock. However if there is any other mods that might be reccommended to help update it I would be open to suggestions. I just don't want to go overboard, just a little tweak or two.

Thanks in advance for any and all replies.

Chris Nicholls
__________________
Chris Nicholls
  Reply With Quote
Old 9th January 2006, 08:27 PM   #2
markanica is offline markanica  Netherlands
diyAudio Member
 
Join Date: Mar 2004
Location: Just below sealevel
Default Ag 9016

The schematic might help you....it's on the forums....

Sorry, I have no other info

http://www.diyaudio.com/forums/showt...554#post188554

Good Luck!
__________________
Mark
  Reply With Quote
Old 9th January 2006, 08:36 PM   #3
Tube_Dude is offline Tube_Dude  Portugal
diyAudio Member
 
Tube_Dude's Avatar
 
Join Date: Mar 2002
Location: Aveiro-Portugal
Hi Chris

Can you tell us if this fuses are mains fuses or secondary fuses?

Are the resistor connected across the mains input?
__________________
Jorge
  Reply With Quote
Old 12th January 2006, 11:52 AM   #4
Chrisssssssss is offline Chrisssssssss  Canada
diyAudio Member
 
Join Date: Nov 2004
Location: Vancouver B.C. Canada
Hey all,

I figured it out. Sounds good... it was the resistor (big one) that is located across the fuses that are by the transformers. It was the value of 1K

Thanks again!!

Chris
__________________
Chris Nicholls
  Reply With Quote
Old 12th January 2006, 02:10 PM   #5
kathodyne is offline kathodyne  Netherlands
diyAudio Member
 
Join Date: Feb 2005
Location: leeuwarden, netherlands
Hello,

I also own an Ag9016.
They are very nice amps indeed, and can take quite a beating!!
(it played a whole night without speakers connected, still works)

i've been looking into if there were tweaks to perform on the amp, haven't done this....yet....

There was a thread on DIY called:
40 yrs old philips ag9016 se flea-power ?

in post #19 and 20 there is a big tweak-schematic which should make the amp perform a lot better (and losing the tone controls)

hope you can find it....
__________________
emission over emittor
  Reply With Quote
Old 12th January 2006, 06:32 PM   #6
Svein_B is offline Svein_B  Norway
diyAudio Member
 
Join Date: Oct 2005
I also have an AG9016, bought at a flea-market last year. Intended first to use it for parts, but found that it worked perfectely.

I have done only a couple of small mods, and a little "tube rolling".
- I disconnected the Loudness function from the volume control.
- Installed a switch to bypass the tone controls.

The mods are marked in red on the top channel on the attached circuit diagram. I also changed the electrolytic caps C9/12/39/42 to new ones, with slightly larger value.

The "tweak" mentioned in the earlier thread 40 yrs old philips ag9016 se flea-power ? seems more like a total re-build.

--
Svein B.
  Reply With Quote
Old 12th January 2006, 07:31 PM   #7
Svein_B is offline Svein_B  Norway
diyAudio Member
 
Join Date: Oct 2005
Quote:
Originally posted by Svein_B
The mods are marked in red on the top channel on the attached circuit diagram.
Sorry, the diagram seems to have been lost in my posting. It is here: http://i27.photobucket.com/albums/c1...16dia-mod1.jpg

I will also consider a suitable replacement for C11/41. The original value of 3.3 nF will have -3dB at around 200 Hz (maybe that is the lowest frequency the OPT can handle ?). Ceramic tube caps are also not enjoying the highest reputation as coupling caps - as far as I know.

--
Svein_B
  Reply With Quote

Reply


Need Help. Anyone with Philips AG 9016??Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Philips AG-9016 Upgrades??? lpd Tubes / Valves 2 29th August 2011 06:27 PM
FS Alnico Philips AD3800M AD3800AM and Philips transformers guglielmope Swap Meet 8 10th January 2011 12:28 PM
philips cd 880 philips cd880 service manual 0519 Digital Source 4 28th August 2008 12:43 PM
Philips CDM-3 Angelm Digital Source 1 31st March 2003 05:52 PM


New To Site? Need Help?

All times are GMT. The time now is 05:45 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki