actually that is intentional...
Why? If I may ask? Because Professor has a point here....
Stereo amp prototype board...
OK, I'll bite. Looks like pencil tubes but they seem a little bigger than the ones I have. What are they and what's the amp?
OK, I'll bite. Looks like pencil tubes but they seem a little bigger than the ones I have. What are they and what's the amp?
6Ж32Б-В, 6Ж9Г-В. Stereo microphone preamp. SE transformer outputs, 600 Ohm 0 dB. Pentodes with feedback resistor between anodes.
6Н16Б-В in the microphone itself and in a HPF (Sallen Key)
A stereo condenser vacuum tube microphone, with switchable HPF and an optical compressor - limiter.
Attachments
6Ж32Б-В, 6Ж9Г-В. Stereo microphone preamp. SE transformer outputs, 600 Ohm 0 dB. Pentodes with feedback resistor between anodes.
6Н16Б-В in the microphone itself and in a HPF (Sallen Key)
A stereo condenser vacuum tube microphone, with switchable HPF and an optical compressor - limiter.
Going to test tomorrow...
Attachments
Beautiful microphone. Similar to the Russian Octave. They are produced in my city View attachment 594973
Thank you. The body for the prototype I took from Marshall MXL microphones.
Octava does not produce stereo vacuum tube condenser microphones with 0 dB output.
Thank you. The body for the prototype I took from Marshall MXL microphones.
Octava does not produce stereo vacuum tube condenser microphones with 0 dB output.
It's Russia: D: D: D. On request they make any, with any characteristics. Even if you want to cover with gold:п. The factory is 100 meters away from me ...
But your microphone looks super confident that sounds the same. Excellent work
6Ж32Б-В, 6Ж9Г-В. Stereo microphone preamp. SE transformer outputs, 600 Ohm 0 dB. Pentodes with feedback resistor between anodes.
6Н16Б-В in the microphone itself and in a HPF (Sallen Key)
A stereo condenser vacuum tube microphone, with switchable HPF and an optical compressor - limiter.
Interesting project. Thx for posting it. Someday I hope to play with pencil tubes for a guitar pre-amp.
It's Russia: D: D: D. On request they make any, with any characteristics. Even if you want to cover with gold:п. The factory is 100 meters away from me ...
View attachment 595008
But your microphone looks super confident that sounds the same. Excellent work
Yes, they cover membranes by gold. Mine that were made in USA (or may be in China?) are similar, copied from the same Neumann microphones.
Here is the record that I made when tested mine, it is stereo, and sounds as if you are there:
https://drive.google.com/file/d/0B9xFhM0MABHyb3kzRUJ6QmYwbHM/view?usp=sharing
Last edited:
Top center is the Phono pre? And btw, how do you control tracking force? (edit: nice system btw)
This is a special vertical model MITSUBISHI LT-SV (One of my favorite toy)
yes similar to audio note M10Top center is the Phono pre? And btw, how do you control tracking force? (edit: nice system btw)
Mitsubishi LT-5V is designed to work in vertical position
Impressive!
Schematics and details of making amplifiers with rs1026, please?
schematics are designed by Noyan Akdulun (he is here on forum too) and he is keeping it in secret,sorry
details of making? hours and hours and hours working with my hands
- Home
- Amplifiers
- Tubes / Valves
- Photo Gallery