|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
1st January 2006, 11:19 AM
|
#1 |
|
diyAudio Member
Join Date: Nov 2002
|
Bias pot question
Hello,
I have a Roy Mottram driver board in my Dynaco stereo 70 amplifier and I was wondering if these Vishay/Sfernice Single turn trimmers that are used on this driver board would be large enough wattage wise to work on my Quicksilver mono block converted 8417 amps. Mouser lists this part as .5 watt/50K at less then a buck each. This would allow the usage of non matched output tubes. Mouser Part # 72-T20YP-50K |
|
|
1st January 2006, 02:49 PM
|
#2 |
|
diyAudio Member
Join Date: Jun 2002
Location: Macedon NY
|
If there is 60V across it, that's about .07 watt (v^2 / R). You'll want to use a fixed resistor in series to reduce the range and make it easier to set (and you DON'T want to allow the bias to go to zero volts...).
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| F5 bias question | richD | Pass Labs | 8 | 21st August 2009 04:29 PM |
| CCS bias question | alexmoose | Tubes / Valves | 4 | 22nd July 2006 05:21 PM |
| A question of bias... | DrG | Tubes / Valves | 30 | 28th August 2003 09:30 AM |
| a75 bias question | SteveG | Pass Labs | 3 | 16th January 2002 11:06 PM |
| New To Site? | Need Help? |
| Page generated in 0.07316 seconds (66.30% PHP - 33.70% MySQL) with 10 queries |
