Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Do I want a fan?
Do I want a fan?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 11th October 2005, 06:43 AM   #1
buliwyf is offline buliwyf  Philippines
diyAudio Member
Join Date: Oct 2005
Default do i want a fan?

The amp is a Laney VC30 (guitar amp, combo). Class A, 4xEL84 Sovtek's at the power section, 3xECC83 in pre-amp (sovtek too i believe. they got covers).

The valves are "hanging" at the bottom of the amp and are exposed.

Now, I always run my amp at full blast (volume at 10), with overdrive for at least an hour straight when playing on shows.

It gets pretty hot... Would it help (valve life or something that I dont know) if I put fan behind the amp? Should it be "blowing to" the EL84's or just acting as an exhaust/air circulator?

I noticed that when the amp is hot, the treble response decreases. Now I like this sound but i was wondering if this is bad for the amp?
  Reply With Quote
Old 11th October 2005, 07:53 AM   #2
Robski666 is offline Robski666  Australia
diyAudio Member
Robski666's Avatar
Join Date: Sep 2005
Hi buliwyf

I see your in the Philippines so your local wx is hot and humid yes?

more cooling is always a good thing this usually was not a major design concern ( a lot of equipment was/is designed for cooler climates) but additional cooling could extend the life of the components in your amp. The problem is how practical is providing the extra cooling? Without knowing the details of your amp I have used fairly low velocity fans to move air over the out put tubes and then to the outside of the enclosure. What this does is slightly cool the glass envelope of the tube which in turn removes heat from the internals of the tubes.

  Reply With Quote
Old 11th October 2005, 08:39 AM   #3
TonyTecson is offline TonyTecson  Philippines
diyAudio Moderator
TonyTecson's Avatar
Join Date: May 2003
Location: Palatiw, Pasig City
Do I want a fan?
can you post pictures? a fan or fans is not a bad idea at all! your amps will be happy that you did put in fans!
planet10 needs your help: Let's help Ruth and Dave...http://www.diyaudio.com/forums/plane...ml#post5010547[B
  Reply With Quote
Old 11th October 2005, 10:13 AM   #4
buliwyf is offline buliwyf  Philippines
diyAudio Member
Join Date: Oct 2005
here it is, without the metal grill
Click the image to open in full size.

with the metal grill (will mount a fan to the grill perhaps)
Click the image to open in full size.

top vents
Click the image to open in full size.
  Reply With Quote
Old 11th October 2005, 01:10 PM   #5
Trout is offline Trout  United States
diyAudio Member
Trout's Avatar
Join Date: Nov 2004
Location: Midwest Madman
Hi, Though Not the most popular amp, Seymour Duncan had an easy approach to a fan to its 100W convertable,
Heres a picture from The DIY guitarist website Fan


I own that exact Duncan amp, The Fan does effectivly provide some additional cooling, Any airflow around the tubes is a good thing

It could easily be installed in your amp with minimal tools. Just read The Saftey section on this board while preforming such mods!!!
  Reply With Quote
Old 11th October 2005, 09:13 PM   #6
SHiFTY is offline SHiFTY  New Zealand
diyAudio Member
SHiFTY's Avatar
Join Date: Jul 2002
Location: New Zealand
Do it. Preferably blow air over all the tubes and transformers. Even a standard computer fan would be fine...
  Reply With Quote
Old 12th October 2005, 10:45 PM   #7
Johan Potgieter is offline Johan Potgieter  South Africa
diyAudio Member
Join Date: May 2005
Location: Pretoria, South Africa
An almost unnecessary reply since we all agree, but just to support:


If note is taken that e.g. in an 6L6GC the maximum plate dissipation rating goes up from 25W to 30W (some make it 35W) by the almost unnoticable increase in G1-fin size and mounting rods thickness (i.e. improved radiation/conduction to the socket), the importance of extra heat removal is evident.

One must further keep in mind that heat is also a definite enemy of components, particularly capacitors. With your mounting, the tubes will certainly generate a substantially higher temperature in that department. I would go so far as to say that that could easily be your greater danger.

With the moderate cost of efficient fans these days, I would even consider 2 of them in a blow-in blow-out kind of fashion. (Some of us do prefer push-pull, don't we?!)
  Reply With Quote
Old 13th October 2005, 06:25 AM   #8
buliwyf is offline buliwyf  Philippines
diyAudio Member
Join Date: Oct 2005
okay i put fans

2 80mm 12v fans (4,000rpm@12v). I also put an on/off switch and an outlet for an AC adapter for convenience.

I used a selectable voltage adapter, so I can choose from 1.5v to 12v currently im running them at 7.5v since anything above that is waay to noisy.

btw, they're getting air outside then blow to the tubes

Click the image to open in full size.
  Reply With Quote
Old 13th October 2005, 06:41 AM   #9
Optical is offline Optical  New Zealand
diyAudio Member
Join Date: Nov 2002
Location: Auckland, New Zealand
Interesting, i have often wondered about this as my valve amps get damn hot..

time for some fans!
  Reply With Quote
Old 13th October 2005, 06:54 AM   #10
Nordic is offline Nordic  South Africa
diyAudio Member
Nordic's Avatar
Join Date: Sep 2005
Just blow the air over the hot parts, Blowing air provides lots of fresh cool air molucules which come in contact with the heatsink and carries off the heat... when you reduce the density of airmolucules (sucking), you starve the heatsink of air to cool down with efficiently...

In enclosed containers like PC cases its acceptable to have exhaust fans, but the should not be where they interfere with airflow to the heatsink...

The noise is mainly because you screwed the fans directly to the grill... you get these rubber grommets you can mount the fans with cheaply... dont know what to drill holes in to mount it on in a grill though... anyhow, alot of the noise is formed by the fans vibration... a 120mm fan spins slower to move the same amount of air, and should be much quiter..

P.S. Johan do you think the transistors will heat up more even if you don't turn the volume higher than before?
  Reply With Quote


Do I want a fan?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

New To Site? Need Help?

All times are GMT. The time now is 09:12 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio