Best 300B SE OPT? - Page 2 - diyAudio
Go Back   Home > Forums > Amplifiers > Tubes / Valves

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 11th June 2011, 09:23 PM   #11
diyAudio Member
 
Join Date: Sep 2003
Location: London
I'm reviving this thread to see what new information we can squeeze out about the best OPTs for our beloved 300b SETs.

Interested particularly in actual comparative listening data, rather than word of mouth recommendations.

I just compared these:
a) O-netics OPT. This was flat out my favourite - in another class for tone and detail
b) Lundahl LL1620/60mA. Lacks the refinement of the O-netics on strings and voices, but it does have quite good tone to instruments. A loss of micro-detail compared to the O-netics. Bass was strong but less defined in tone
c) Audio Note Trans-300/IE. About the same level as the Lundahl above - smoother and more rounded but a further slight loss of micro detail. Bass again strong but less defined in tone than the O-netics

I further have been using the Lundahl LL1623/50mA in another amp. I haven't compared this directly but my other listening gives me the impression it's better than the LL1620. I've loaned it out so can't compare right now.

Can others share their listening experiences?

Andy
  Reply With Quote
Old 11th June 2011, 09:31 PM   #12
diyAudio Member
 
REDHORSEMAN's Avatar
 
Join Date: Oct 2010
Quote:
Originally Posted by bbaker6212 View Post
a good PP amp like what? I currently have a KTA 3030 PP 300B.
Like a Marantz model 8
  Reply With Quote
Old 11th June 2011, 09:38 PM   #13
diyAudio Member
 
Join Date: Sep 2003
Location: London
I think we're talking SETs here!

Correction to the Audio Note - I think it's a Trans-152. That's a cheaper version (about half the price). It has no markings but the size fits. It has endbells.

Best

Andy

Last edited by andyjevans; 11th June 2011 at 09:50 PM.
  Reply With Quote
Old 11th June 2011, 10:27 PM   #14
diyAudio Member
 
Vinylsavor's Avatar
 
Join Date: Feb 2002
Location: Lindau
Hi!

All parts in an amp need to be balanced in order to get a good result. Especially if you are looking for the best sound/cost ratio. If a poor driver and mediocre power supply are chosen the amp will not sound good even with a sophisticated output transformer.

My picks:

For no compromise amps with the best possible driver, PSU and filament supply:

Tango FC30-3.5-S
I have not tried the Tango X3.5S yet, that one is probably even better
I also have a permalloy core 3.5k Tangot OPT which I have not tested yet.

Ambitious amp, but somewhat restricted budget:

Tango XE20S

If on a budget:

Lundahl LL1664


Oh, and the tube makes a big difference too. For me chinese or russian 300Bs do not cut it.

Best regards

Thomas
__________________
http://vinylsavor.blogspot.com/
  Reply With Quote
Old 11th June 2011, 10:44 PM   #15
diyAudio Member
 
Join Date: Jan 2011
Any word on Hashimotos?
  Reply With Quote
Old 12th June 2011, 06:04 AM   #16
Jaap is offline Jaap  Netherlands
diyAudio Member
 
Jaap's Avatar
 
Join Date: Dec 2002
Location: Netherlands
Nobody likes toroids ?
  Reply With Quote
Old 12th June 2011, 07:42 AM   #17
работник
diyAudio Member
 
Rod Coleman's Avatar
 
Join Date: Jul 2004
Location: Warwickshire UK
Andy, don't forget that ETF 2009 shootout was a 300B OT contest, featuring some of the trafo choices mentioned here.

European Triode Festival - ETF2009 Shootout

Lots of comparative listening there!

Personally, I use, and recommend, the Sowter SA08s.

They may not get much of a mention elsewhere, but what I can say for certain is that they allow me to develop 300B driver and filament circuits by listening. In listening tests, the SA08 allows very easy selection among tiny circuit changes in any other part of the amplifier. And I am able to enjoy big symphonies in the same way as I do live concerts, and often the pleasure is greater, because the orchestral parts are better and more clearly presented.

SA08 SINGLE ENDED OUTPUT TRANSFORMER

All good quality OTs are high cost purchase, but spend happily - they last a lifetime.
  Reply With Quote
Old 12th June 2011, 11:15 AM   #18
diyAudio Member
 
Join Date: Sep 2003
Location: London
Thanks for the ETF shootout info. Clearly the AN Trans-300 is better than the Trans-152 which is pretty average really and didn't do too well in the Silk shootout. Lundahls don't seem to be at the top of the tree - there's a lot of windings in most of them. I was disappointed with the LL1620.

Andy
  Reply With Quote
Old 12th June 2011, 11:25 AM   #19
kmaier is offline kmaier  United States
diyAudio Member
 
kmaier's Avatar
 
Join Date: Jul 2007
Quote:
Originally Posted by carbondated View Post
Any word on Hashimotos?
Yes, I use them. They have become my first choice actually. I am designing a 300B SE amp using their H-30-5S OPT.

http://tube-amps.net/images/Hashimot...30-5S_1024.jpg

Regards, KM
__________________
... just because you're paranoid, it doesn't mean they're not after you...
  Reply With Quote
Old 12th June 2011, 12:19 PM   #20
diyAudio Member
 
greenvalve's Avatar
 
Join Date: May 2007
The transformers I had Bud wind are for GM70 tubes. With an impedance of 6K they could be swapped into my DRD 300B amp easily. If you would like I will give that a try, as I have been wondering how they would sound. Not that the standard copper Electraprint iron is any slouch.

I also have some solid silver secondary Electra-print iron for 2A3 finals. They are nice. And Gery at Transcendar makes some great iron. Back when he was still taking custom orders he wound 6pr of custom 10Y/801A transformers that I still listen to daily. Great synergy with those little 10+ Transcendars.

The most detail can be heard from the silver secondary Electraprint iron, the best tone from the Onetics, but we are talking many different amps, so its not apple to apple because of my limited experience.
__________________
http://greenvalve.wordpress.com

Last edited by greenvalve; 12th June 2011 at 12:34 PM.
  Reply With Quote

Reply


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
300B like 845 rick57 Tubes / Valves 25 4th October 2012 09:19 AM
FS: for 300B (JE Labs 300B SE) builders cartman Swap Meet 2 29th October 2008 01:13 PM
sub out in my 300b se? Help me please. fergs1 Tubes / Valves 1 4th December 2006 06:17 PM
* 35 watt * 300B SE = super 300B + Class A2 rick57 Tubes / Valves 4 13th July 2005 04:18 PM
WE 300B Vs &&&& Trout Tubes / Valves 22 20th December 2004 08:57 AM


New To Site? Need Help?

All times are GMT. The time now is 05:33 AM.


vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Copyright ©1999-2014 diyAudio

Content Relevant URLs by vBSEO 3.3.2