|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
16th September 2005, 02:54 PM
|
#1 |
|
diyAudio Member
Join Date: Sep 2005
|
Test settings for Hickok 539A for 183/483 tube?
The roll chart on my Hickok 539A does not have test settings for the 183 or 483 tube. I am hoping someone has these settings, if not for a 539A, then for a 539B, 539C or 533. Thanks for any help on this.
|
|
|
3rd April 2011, 05:04 PM
|
#2 |
|
diyAudio Member
Join Date: Apr 2011
Location: Cocoa Florida
|
Sir:The 183/483 tube is 45 with a 5 volt filament. use the settings for the 45 but set the filament to 5v...George
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| test settings hickok i177B for 5ar4/gz34 | kathodyne | Tubes / Valves | 3 | 12th November 2008 07:40 AM |
| Hickok TV-7A/U settings for 8417 tube? | GordonW | Tubes / Valves | 2 | 11th January 2008 06:28 PM |
| Help with Hickok 539A tube tester repair.. | Mort Caldwell | Tubes / Valves | 7 | 16th January 2005 02:27 AM |
| Hickok 600/605/800 settings? | lgo51 | Tubes / Valves | 1 | 3rd May 2002 03:18 AM |
| Hickok 539A settings | John S. | Tubes / Valves | 4 | 27th December 2001 03:16 AM |
| New To Site? | Need Help? |
| Page generated in 0.07064 seconds (67.90% PHP - 32.10% MySQL) with 10 queries |
