Electrolytic Vs polyprop capacitors
I have searched and not found an answer either here or in the musical instrument section.
I'm building a Fender Champ clone, a very basic guitar amp with 6V6GT for the power section. The amp has a number of 8, 16 and 25uF caps in there, now the supplier of the kit supplies electrolytic caps for these positions, but I've been building passive Xovers recently so anything upto 60uF I automatically go for polyprop caps out of habit because they are what I have been using for the Xovers.
What would the effect be of replacing these larger value electrolytic caps with polypropylene equivalents? I'm building the amp chassis from scratch so space isn't an issue, there is only a few of them so cost is not a big worry.
what is YOUR opinion, will their be any improvement in the sound, would I loose any character of the amp etc. I'm not trying to make a carbon copy of the amp, just a decent small all vale amp with a good tone.
For a guitar amp, I don't see much advantage. For a hifi amp, it might be worthwhile.
It would look cool (pp caps are MUCH bigger), and you might get better long term reliability.
Ditto what SY said.
A sound generator is somewhat less critical than a reproducer.
|All times are GMT. The time now is 06:15 AM.|
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2015 DragonByte Technologies Ltd.
Copyright ©1999-2015 diyAudio