Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

HELP! B+ voltage problem/burning power resistor
HELP! B+ voltage problem/burning power resistor
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 6th September 2005, 03:00 AM   #1
chalieroundeye is offline chalieroundeye  United States
diyAudio Member
Join Date: May 2004
Location: Seattle, WA
Default HELP! B+ voltage problem/burning power resistor

hey, im new to the fourm, been a fan for quite awhile though, i have a problem and this looks like a great place to start!!


heres the story:

i have a peavey VTM 120 guitar amp, about a year ago, i was playing and i started smelling smoke, i turned it off and took a look to investigate, found that the power resistor thats in line with the b+ voltage got burnt. (its a 400ohm, 10W btw), after not much findings besides the burn gash, i checked the resistance value with my meter, everything was fine.. i turned it back on never had any more problems... nothing solved.. since then, its been down waiting on filter caps, i got them recently and i've replaced them, today i was again playing, cranking it up, only now with the chasis revealing the components, and lo and behold, it started smoking again, this time i threw a meter on it, and found that the voltage drop on the amp load side drops considerably when cranked (about 72 volts!) and the resistor got too hot to touch, but ONLY when i have the guitar turned up, and the amp master volume turned up, mind you, and in the hi gain jack (there are 2 jacks, low gain and high gain) BUT the tranny side only drops about 20 volts when cranked from 473 to about 452-3. with the volume turned down on the guitar, reguardless of where i have the master volume set at, and the amp out of standby, the sag accross the resistor is about 8 volts. and if i have the master volume low enough, and the guitar up, it wont sag, but as i turn the master up, it startes reallly sagging and engs up at the voltage different on the load side of like i said about, about 72 volts, and the resistor starts to burn.. i know sag is normal when an amp is driven into clipping, but this is too strange... any suggestions on this wierd anomaly??

thanks guys and gals, i have schematics. but i'm not sure if they would be much help at this point..

  Reply With Quote
Old 6th September 2005, 04:36 AM   #2
SY is offline SY  United States
On Hiatus
SY's Avatar
Join Date: Oct 2002
Location: Chicagoland
HELP! B+ voltage problem/burning power resistor
Well, perhaps the 400 ohm resistor is too low power. Let's see, with a 72 volt drop, you must be drawing something like 180 mA at full crank. The resistor will dissipate .18x72 = 13W. A 20 watter might be more appropriate and make sure that it's well spaced from the circuit board and has some ventilation. Alternatively, you could use a 20 or 25 watt aluminum-clad resistor that would bolt to the chassis to get rid of some heat.
"You tell me whar a man gits his corn pone, en I'll tell you what his 'pinions is."
  Reply With Quote


HELP! B+ voltage problem/burning power resistorHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aleph 30 problem - half of power supply voltage on speakers output yoke Pass Labs 18 15th March 2009 06:18 PM
Location of voltage-dropping power resistor hollowman Power Supplies 21 5th December 2008 09:13 PM
Resistor keeps burning in my Marantz 1060! Giaime Solid State 136 19th April 2005 02:59 PM

New To Site? Need Help?

All times are GMT. The time now is 04:02 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio