|
|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
|
||
|
|
Thread Tools | Search this Thread |
|
|
#1 |
|
diyAudio Member
Join Date: Jun 2004
Location: new york
|
I have been living with a SuperIt for the past couple of months. It is ok, but sounds a little muffled compared to my previous mod'ed EAR 834P. I have heard that with a few mods this stage can sound out standing. I plan on removing the volume and balance control, and adding Auricaps. Does anyone have experience mod'ing a SuperIt that might want to share a little insight in to what worked and what didn't? Thanks in advance.
http://www.galibierdesign.com/images/Super_It.gif |
|
|
|
|
#2 |
|
diyAudio Member
Join Date: Feb 2007
Location: georgia
|
Yep,,I know this is an oldie,, but I'll be trying one of thses out soon,, so any help as to tweaks would be greatly appreciated.FWIW,the one that I'm getting has the the George Kaye mods/tweaks. Thanks.
|
|
|
|
|
#3 |
|
diyAudio Member
Join Date: Feb 2007
Location: georgia
|
\\\I replaced all the power supply capacitors,, then on to the film caps with sonicaps,,finally a pair of Mundorf Silver/Oils in the coupling stage,, popped the op-amp a replaced with a opa 2604,,so far it is extremely sweet and detailed,with lots of air,,waiting on the rca's and then I'm done.
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
|
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Moscode 600 hum/turn off thump | MattV | Tubes / Valves | 17 | 9th July 2011 09:13 AM |
| Moscode 600 | dracoskeeper | Tubes / Valves | 1 | 29th November 2008 11:04 PM |
| FS NYAL Minuet Tube Preamp bd | cygnus x1 | Swap Meet | 0 | 28th October 2008 04:41 PM |
| NYAL Super-It - removing volume pots, what resistor value to replace them? | rocketmotor | Tubes / Valves | 2 | 18th May 2006 05:48 PM |
| MOSCODE hybrid DIY | ckwong99 | Tubes / Valves | 0 | 5th September 2005 01:38 AM |
| New To Site? | Need Help? |
| Page generated in 0.57122 seconds (9.48% PHP - 90.52% MySQL) with 11 queries |