|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
| diyAudio Sponsor | ||
|
||
 |
|
|
Thread Tools | Search this Thread |
24th June 2005, 12:20 AM
|
#1 |
|
diyAudio Member
Join Date: Dec 2003
Location: Denver, CO
|
Filament Transformer
I'm looking at transformers for a pre-amp project. I need 9.3 volts at 1.2 amps for the regulator circuit that I want to try, so I'm considering a couple of different 10 volt Triads. The VPL10-2500 produces 10 volts @ 2.5 amps when secondaries are series connected. The VPL20-1200 produces produces 10 volts at 2.5 amps when the secondaries are parallel connected. Is there an advantage one way or the other?
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Airgap for filament transformer ? | Lauscher | Tubes / Valves | 11 | 29th April 2009 06:41 PM |
| Filament Transformer for 26 DHT | korneluk | Tubes / Valves | 7 | 8th January 2008 07:25 PM |
| Filament Transformer | dejanm | Tubes / Valves | 9 | 8th August 2007 07:54 AM |
| WTB: 6.3V Filament Transformer | mrdon | Swap Meet | 1 | 20th March 2006 03:36 AM |
| filament transformer vs plate transformer | contaxchen | Tubes / Valves | 10 | 14th January 2005 11:43 AM |
| New To Site? | Need Help? |
| Page generated in 0.06348 seconds (66.25% PHP - 33.75% MySQL) with 10 queries |
