|
|||||||
| Home | Forums | Rules | Articles | Store | Gallery | Blogs | Register | Donations | FAQ | Calendar | Search | Today's Posts | Mark Forums Read | Search |
| Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum |
  |
|
|
|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving |
 |
|
|
Thread Tools | Search this Thread |
7th May 2005, 11:29 PM
|
#1 |
|
diyAudio Member
Join Date: Feb 2004
Location: South Wales
|
6c33 Set
Hopefully this will work, Ive attached the CCT diagram of my little project
See what you guys think!--(Dont be too hard on me, its my first actual build of a valve amp!) My choice of valves was based on what I had around--My original plan was to make an OTL based on the Allan Kimmel Monoblock, but subbing the EL509's for 6C33, with a few mods Thought Id better do a fairly straightforward SET before building that one! Ive built this on breadboard and considering I havent got a proper O/P Tx, sounds quite good.Hope to wind the TX next week.
__________________
Das Beste Oder Nichts |
|
|
| Thread Tools | Search this Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| 6c33 Se | morfeas | Tubes / Valves | 110 | 23rd November 2010 07:41 PM |
| 6C33 design comments? | nickds1 | Tubes / Valves | 38 | 5th February 2007 12:53 PM |
| 6C33 Circlotron | pat49hk | Tubes / Valves | 50 | 26th January 2006 09:06 AM |
| Amp with 6c33 | bronto64 | Tubes / Valves | 2 | 22nd May 2004 02:46 PM |
| Buy 6C33 in Canada, where? | Jeffy74 | Tubes / Valves | 4 | 16th February 2004 01:39 PM |
| New To Site? | Need Help? |
