Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Tubes / Valves All about our sweet vacuum tubes :) Threads about Musical Instrument Amps of all kinds should be in the Instruments & Amps forum

Please,a) cause of high pitched hum, b)DC wires twisted or not
Please,a) cause of high pitched hum, b)DC wires twisted or not
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 1st May 2005, 08:11 AM   #1
frank2395 is offline frank2395  Australia
diyAudio Member
 
Join Date: Apr 2005
Location: AUD
Default Please,a) cause of high pitched hum, b)DC wires twisted or not

thank you,
a)Mono amp, when I touch the input + (while testing) instead of the normal hum I get a high pitched squeal, amp works ok and silent without touching.

WHY SQUEAL AND NOT HUM

(Not related)

b) on internal wiring AC should be twisted, DC not(advised)

IS THIS CORECT RE DC AND WHY OR NO DIFFERANCE
  Reply With Quote
Old 1st May 2005, 09:38 AM   #2
Giaime is offline Giaime  Italy
diyAudio Member
 
Giaime's Avatar
 
Join Date: Oct 2004
Send a message via MSN to Giaime
a) have you used grid stoppers on the first or so tubes? have you watched the polarity of the NFB wire coming off the OT? try reverse its polarity... I assume that your input is grounded when there isn't anything connected. Btw what amp is? Guitar amp?
Check the layout to avoid that early stages wires doesn't cross later stages...

b) There is no point of twisting DC heaters. But remember that most of the time DC heaters are useless, especially to the output tubes (of course if it isn't directly heated). I would twist them so I can return to AC if I want to.

Hope this helps!
  Reply With Quote
Old 1st May 2005, 12:52 PM   #3
richwalters is offline richwalters
diyAudio Member
 
richwalters's Avatar
 
Join Date: Sep 2003
Location: Schwartzwald
That sounds like a classic symptom of RF around....Got a phase controlled washing machine running at the same time ?The squeal and whine will vary with motor speed..

A striplight on the bench is also wicked source of AM.....I don't get this on my amps.....although the new flourescent save bulbs also emit copious amounts of interference.

Make sure than any sensitive tube wiring is well awy from the HV rectifier/choke circuitry. An unearthed heater supply will also create conditions.

richj
  Reply With Quote
Old 1st May 2005, 07:18 PM   #4
Sch3mat1c is offline Sch3mat1c  United States
diyAudio Member
 
Sch3mat1c's Avatar
 
Join Date: Jan 2003
Location: Milwaukee, WI
Send a message via ICQ to Sch3mat1c Send a message via AIM to Sch3mat1c
Unstable circuit, probably wired wrong or something. I'd go over it with a scope and function generator with zobels and grid stoppers in hand.

Wouldn't doubt it if it's oscillating right now, just that touching the input detunes it and either drops the frequency or switches it to another mode, which is in any case audible.

Heater dress isn't going to have much to do with this, that's more of a hum issue. Heaters can carry unwanted signals however, it's best to AC ground them (tieing the DC potenential to an elevated source usually).

Tim
__________________
Seven Transistor Labs, LLC
Projects and Resources / Electronic Design and Consultation
  Reply With Quote

Reply


Please,a) cause of high pitched hum, b)DC wires twisted or notHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
JVC RX-315 amp high pitched whine miekedmr Solid State 5 28th July 2017 05:44 PM
High pitched whine when using laptop input ormo Chip Amps 33 15th December 2009 07:34 AM
High pitched whine when using active guitar preamp with phantom power HankMcSpank Instruments and Amps 2 25th July 2008 11:39 AM
would twisted pair from a network cable be suitable as hook-up wires inside an amp? jarthel Tubes / Valves 31 24th March 2007 10:24 PM
Conductors (I.C.'s, RCAs, internal wires, speaker wires) bigphil Parts 1 25th November 2005 06:47 PM


New To Site? Need Help?

All times are GMT. The time now is 08:03 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki